# How to adapt a layout to a 14'' resolution

**URL:** <https://forum.inductiveautomation.com/t/how-to-adapt-a-layout-to-a-14-resolution/71817>\
**Category:** Ignition\
**Tags:** perspective\
**Created:** [March 30, 2023, 7:51am UTC](https://forum.inductiveautomation.com/t/how-to-adapt-a-layout-to-a-14-resolution/71817 "2023-03-30T07:51:35Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Miguel\_Cimildoro](https://avatars.discourse-cdn.com/v4/letter/m/53a042/32.png) [@Miguel\_Cimildoro](https://forum.inductiveautomation.com/u/Miguel_Cimildoro)\
**Post date:** [March 30, 2023, 7:51am UTC](https://forum.inductiveautomation.com/t/how-to-adapt-a-layout-to-a-14-resolution/71817/1 "2023-03-30T07:51:35Z")

</div>

hi all, I am trying to correct the layout to a 14'' screen resolution, any recommendations?

I am using a Container Coordinate

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/4/3/43a117006053c9d12dfe7f520996437379aaee5d.png)

---

<div class="post-metadata">

**Author:** ![Gurjot\_Sandhu](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/gurjot_sandhu/32/38368_2.png) [@Gurjot\_Sandhu](https://forum.inductiveautomation.com/u/Gurjot_Sandhu)\
**Post date:** [April 6, 2023, 5:38pm UTC](https://forum.inductiveautomation.com/t/how-to-adapt-a-layout-to-a-14-resolution/71817/2 "2023-04-06T17:38:22Z")

</div>

Hi [Miguel\_Cimildoro](https://forum.inductiveautomation.com/u/Miguel_Cimildoro),

In the designer, if you click on the Coordinate Container you will see a property called mode. Change that to percent and then set an aspect ratio, maybe 1:1. See how that translates to your 14" screen resolution session. Maybe you need to use a different kind of container.

It's hard to tell exactly what needs to be corrected here, so I would recommend reaching out to \* [Inductive Automation Support](https://support.inductiveautomation.com/hc/en-us) so they can remote in and take a look.

---

<div class="post-metadata">

**Author:** ![Miguel\_Cimildoro](https://avatars.discourse-cdn.com/v4/letter/m/53a042/32.png) [@Miguel\_Cimildoro](https://forum.inductiveautomation.com/u/Miguel_Cimildoro)\
**Post date:** [May 8, 2023, 9:56am UTC](https://forum.inductiveautomation.com/t/how-to-adapt-a-layout-to-a-14-resolution/71817/3 "2023-05-08T09:56:47Z")

</div>

thank you very much, it was just the configuration I wanted to try.

regards