# How to add an alarm properties in Alarm Status Table

**URL:** <https://forum.inductiveautomation.com/t/how-to-add-an-alarm-properties-in-alarm-status-table/54362>\
**Category:** Ignition\
**Tags:** ignition80\
**Created:** [December 21, 2021, 5:55pm UTC](https://forum.inductiveautomation.com/t/how-to-add-an-alarm-properties-in-alarm-status-table/54362 "2021-12-21T17:55:00Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![JR7](https://avatars.discourse-cdn.com/v4/letter/j/4da419/32.png) [@JR7](https://forum.inductiveautomation.com/u/JR7)\
**Post date:** [December 21, 2021, 5:55pm UTC](https://forum.inductiveautomation.com/t/how-to-add-an-alarm-properties-in-alarm-status-table/54362/1 "2021-12-21T17:55:00Z")

</div>

Hi All,

Is there a way to add a column in selected alarms or get the alarm component properties of the below image?

It only shows 6 column but i need the Ack Notes Required.

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/e/b/eb93b9050cc44e916da89b750934886db9a2ebc4.png)

Thanks.

---

<div class="post-metadata">

**Author:** ![jespinmartin1](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jespinmartin1/32/57175_2.png) [@jespinmartin1](https://forum.inductiveautomation.com/u/jespinmartin1)\
**Post date:** [December 21, 2021, 6:49pm UTC](https://forum.inductiveautomation.com/t/how-to-add-an-alarm-properties-in-alarm-status-table/54362/2 "2021-12-21T18:49:46Z")

</div>

Go to preview, right click in table header, select the columns you want. Save