# How to add extra column in alarm status table in vision **URL:** \ **Category:** General Discussion\ **Tags:** ignition81, vision\ **Created:** [June 15, 2023, 12:38pm UTC](https://forum.inductiveautomation.com/t/how-to-add-extra-column-in-alarm-status-table-in-vision/75077 "2023-06-15T12:38:54Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![justinedwards.jle](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/justinedwards.jle/32/37854_2.png) [@justinedwards.jle](https://forum.inductiveautomation.com/u/justinedwards.jle)\ **Post date:** [June 15, 2023, 1:14pm UTC](https://forum.inductiveautomation.com/t/how-to-add-extra-column-in-alarm-status-table-in-vision/75077/3 "2023-06-15T13:14:56Z")
If you look closely in the video of this older post that is actually about manipulating checkbox sizes, you can see where I slyly snuck in my UD columns. Nobody seemed to notice though. lol > [@Alarm table checkbox size](https://forum.inductiveautomation.com/t/alarm-table-checkbox-size/67665/3): > > Lately, I've been messing around with the alarm status table in my spare time for fun, and in doing so, I've developed a way to produce larger checkboxes. In reality, it's just a simple overlay that adjusts the row height and column width to accommodate whatever size checkbox is specified and then paints the larger checkboxes over the originals. Listeners are used to repaint the checkboxes whenever they are clicked or when the table model changes as a result of filtering, sorting, or alarm state… --- _[View the full topic](https://forum.inductiveautomation.com/t/how-to-add-extra-column-in-alarm-status-table-in-vision/75077)._