# How to build this component: Multi Layered Gauge **URL:** \ **Category:** Ignition\ **Tags:** perspective\ **Created:** [March 27, 2025, 7:17am UTC](https://forum.inductiveautomation.com/t/how-to-build-this-component-multi-layered-gauge/104290 "2025-03-27T07:17:05Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![lrose](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/lrose/32/62724_2.png) [@lrose](https://forum.inductiveautomation.com/u/lrose)\ **Post date:** [March 27, 2025, 10:35am UTC](https://forum.inductiveautomation.com/t/how-to-build-this-component-multi-layered-gauge/104290/4 "2025-03-27T10:35:03Z")
> [@pascal.fragnoud](#): > > But chances are this is just a coordinate container used to layer 3 simple gauges on top of each other: I would use an SVG to make this. > [@Perspective, faster page](https://forum.inductiveautomation.com/t/perspective-faster-page/69885/35): > > Okay, I had a bit of free time today, so here is a complete SVG solution. You could do the Label as SVG text as well, or a gauge needle if you wanted, I haven't gone that far. Just a little example of the power of using the Ignition Designer to add SVG elements. I didn't include the label for the example. Note: All of this (outside of the calculations needed to find the points for the shape) was done inside of the designer (yes I can be somewhat of a masochist at times. rofl). First a s… --- _[View the full topic](https://forum.inductiveautomation.com/t/how-to-build-this-component-multi-layered-gauge/104290)._