# How to configure Murrelektronik make Impact67Pro module 54631 directly with Ignition server

**URL:** <https://forum.inductiveautomation.com/t/how-to-configure-murrelektronik-make-impact67pro-module-54631-directly-with-ignition-server/108788>\
**Category:** Ignition\
**Created:** [July 22, 2025, 7:09pm UTC](https://forum.inductiveautomation.com/t/how-to-configure-murrelektronik-make-impact67pro-module-54631-directly-with-ignition-server/108788 "2025-07-22T19:09:43Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![bhpatel017](https://avatars.discourse-cdn.com/v4/letter/b/b4bc9f/32.png) [@bhpatel017](https://forum.inductiveautomation.com/u/bhpatel017)\
**Post date:** [July 22, 2025, 7:09pm UTC](https://forum.inductiveautomation.com/t/how-to-configure-murrelektronik-make-impact67pro-module-54631-directly-with-ignition-server/108788/1 "2025-07-22T19:09:43Z")

</div>

I have one project where I have to sue Murrelektronik make Impact67Pro module 54631 directly with Ignition without PLC. is it possible or do I need PLC?

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [July 22, 2025, 7:17pm UTC](https://forum.inductiveautomation.com/t/how-to-configure-murrelektronik-make-impact67pro-module-54631-directly-with-ignition-server/108788/2 "2025-07-22T19:17:17Z")

</div>

This [spec sheet](https://shop.murrinc.com/index.php?cl=details&fnc=outputSpecSheet&anid=000000000000054631_1) suggests it has ethernet and OPC UA on board... you might be able to connect Ignition directly via OPC UA connection.

---

<div class="post-metadata">

**Author:** ![Spencer\_Lommel1](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/spencer_lommel1/32/78679_2.png) [@Spencer\_Lommel1](https://forum.inductiveautomation.com/u/Spencer_Lommel1)\
**Post date:** [July 22, 2025, 7:24pm UTC](https://forum.inductiveautomation.com/t/how-to-configure-murrelektronik-make-impact67pro-module-54631-directly-with-ignition-server/108788/3 "2025-07-22T19:24:26Z")

</div>

To build on what @Kevin.Herron said I'd give this a read

> **[OPC-UA and Device Connections | Ignition User Manual](https://www.docs.inductiveautomation.com/docs/7.9/opc-ua-and-device-connections)**
>
> What is OPC?

Typically connecting devices directly over ethernet directly with OPC UA is a bit more manual configuration but it can be done! I've been working on a custom PCB that integrates directly with our Ignition gateway over Ethernet and it was a lot of work but it's working amazing now and the devices are basically plug and play which was the end goal!

---

<div class="post-metadata">

**Author:** ![bhpatel017](https://avatars.discourse-cdn.com/v4/letter/b/b4bc9f/32.png) [@bhpatel017](https://forum.inductiveautomation.com/u/bhpatel017)\
**Post date:** [July 22, 2025, 7:29pm UTC](https://forum.inductiveautomation.com/t/how-to-configure-murrelektronik-make-impact67pro-module-54631-directly-with-ignition-server/108788/4 "2025-07-22T19:29:45Z")

</div>

Hey Kevin, Appreciate your prompt reply.

---

<div class="post-metadata">

**Author:** ![bhpatel017](https://avatars.discourse-cdn.com/v4/letter/b/b4bc9f/32.png) [@bhpatel017](https://forum.inductiveautomation.com/u/bhpatel017)\
**Post date:** [July 22, 2025, 7:30pm UTC](https://forum.inductiveautomation.com/t/how-to-configure-murrelektronik-make-impact67pro-module-54631-directly-with-ignition-server/108788/5 "2025-07-22T19:30:45Z")

</div>

Hey Spencer, Thank you....