# How to create and integrate 3D plant/component designs with Ignition Perspective?

**URL:** <https://forum.inductiveautomation.com/t/how-to-create-and-integrate-3d-plant-component-designs-with-ignition-perspective/112025>\
**Category:** Ignition\
**Tags:** perspective\
**Created:** [November 7, 2025, 6:50am UTC](https://forum.inductiveautomation.com/t/how-to-create-and-integrate-3d-plant-component-designs-with-ignition-perspective/112025 "2025-11-07T06:50:04Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![chilmesantosh](https://avatars.discourse-cdn.com/v4/letter/c/aca169/32.png) [@chilmesantosh](https://forum.inductiveautomation.com/u/chilmesantosh)\
**Post date:** [November 7, 2025, 6:50am UTC](https://forum.inductiveautomation.com/t/how-to-create-and-integrate-3d-plant-component-designs-with-ignition-perspective/112025/1 "2025-11-07T06:50:04Z")

</div>

I’d like to know which tools or software are commonly used to create 3D models or plant/component designs that can be integrated with Ignition. Also, what is the recommended procedure or workflow to bring these 3D visuals into Ignition Perspective?

Thanks in advance for your help!