# How to deploy any project that is created in ignition designer in another machine **URL:** \ **Category:** General Discussion\ **Created:** [December 15, 2023, 8:44am UTC](https://forum.inductiveautomation.com/t/how-to-deploy-any-project-that-is-created-in-ignition-designer-in-another-machine/83181 "2023-12-15T08:44:03Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![Swathi\_G](https://avatars.discourse-cdn.com/v4/letter/s/f04885/32.png) [@Swathi\_G](https://forum.inductiveautomation.com/u/Swathi_G)\ **Post date:** [December 15, 2023, 8:44am UTC](https://forum.inductiveautomation.com/t/how-to-deploy-any-project-that-is-created-in-ignition-designer-in-another-machine/83181/1 "2023-12-15T08:44:03Z")
I have created one project in ignition designer , and some opc tags are binded with that, so I want to run this project on another machine/system, then what is its steps? And is it mandatory that ignition is installed in another machine ---
**Author:** ![Matrix\_Engineering](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/matrix_engineering/32/19781_2.png) [@Matrix\_Engineering](https://forum.inductiveautomation.com/u/Matrix_Engineering)\ **Post date:** [December 15, 2023, 9:18am UTC](https://forum.inductiveautomation.com/t/how-to-deploy-any-project-that-is-created-in-ignition-designer-in-another-machine/83181/2 "2023-12-15T09:18:20Z")
> **[Inductive University Course List - Learn Ignition Free](https://www.inductiveuniversity.com/courses/ignition/clients-and-sessions/8.1)** > > Learn the fundamentals and advanced features of Ignition while earning your IU credential ---
**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\ **Post date:** [December 15, 2023, 9:36am UTC](https://forum.inductiveautomation.com/t/how-to-deploy-any-project-that-is-created-in-ignition-designer-in-another-machine/83181/3 "2023-12-15T09:36:22Z")
> [@Swathi\_G](#): > > I want to run this project on another machine/system, then what is its steps? > And is it mandatory that ignition is installed in another machine? What project? A **gateway** project, a **Vision** (client) project or a **Perspective** project (which runs on the gateway but is accessed by the client browser)? What do you mean by **machine**? A **PC** or an industrial machine with a **PLC**? Please write clearly. ---
**Author:** ![Swathi\_G](https://avatars.discourse-cdn.com/v4/letter/s/f04885/32.png) [@Swathi\_G](https://forum.inductiveautomation.com/u/Swathi_G)\ **Post date:** [December 15, 2023, 10:01am UTC](https://forum.inductiveautomation.com/t/how-to-deploy-any-project-that-is-created-in-ignition-designer-in-another-machine/83181/4 "2023-12-15T10:01:24Z")
Ok, So I have created one project in ignition designer, in which I have created Perspective one and run this project via Tools -\>Launch Perspective -\>Launch Session, and it will redirect to browser ([http://localhost:8088/data/perspective/client/P1](http://localhost:8088/data/perspective/client/P1)) So now if I want to run this project on another PC(another desktop) then what is it's steps, any gateway setting is required to change ? Because right now running that project in my local PC. And also is it mandatory that Ignition is installed in another machine where I want to run this project? ---
**Author:** ![Matrix\_Engineering](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/matrix_engineering/32/19781_2.png) [@Matrix\_Engineering](https://forum.inductiveautomation.com/u/Matrix_Engineering)\ **Post date:** [December 15, 2023, 10:03am UTC](https://forum.inductiveautomation.com/t/how-to-deploy-any-project-that-is-created-in-ignition-designer-in-another-machine/83181/5 "2023-12-15T10:03:53Z")
If you watch the videos in the link I provided, this is all explained. ---
**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\ **Post date:** [December 15, 2023, 10:09am UTC](https://forum.inductiveautomation.com/t/how-to-deploy-any-project-that-is-created-in-ignition-designer-in-another-machine/83181/6 "2023-12-15T10:09:12Z")
As @Matrix_Engineering is pointing out, you are missing basic fundemental knowledge about how Ignition works and you need to take the training. To answer your question and get you started: - You need a **gateway** with Ignition installed, running on it and your project. - For **Perspective** you can run as many **clients** as you want on other PCs. Start the browser and enter `:8088`. - No installation is required on the client PC. ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [December 15, 2023, 1:12pm UTC](https://forum.inductiveautomation.com/t/how-to-deploy-any-project-that-is-created-in-ignition-designer-in-another-machine/83181/7 "2023-12-15T13:12:30Z")
One of your fundamental misunderstandings: > [@Swathi\_G](#): > > created one project in ignition designer You created one project _ **with** _ the Ignition designer _ **in** _ your local gateway. The project doesn't "live" in the designer, but in the gateway. The gateway is, among other things, a web server. So clients can connect from other PCs without installing another gateway, as long as the network and firewalls allow it. (Though you might install a Vision Client Launcher or Perspective Workstation in a client.)