# How to Download and Install Maker?

**URL:** <https://forum.inductiveautomation.com/t/how-to-download-and-install-maker/115222>\
**Category:** Maker\
**Created:** [April 23, 2026, 7:18pm UTC](https://forum.inductiveautomation.com/t/how-to-download-and-install-maker/115222 "2026-04-23T19:18:56Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![jlblack](https://avatars.discourse-cdn.com/v4/letter/j/c68b51/32.png) [@jlblack](https://forum.inductiveautomation.com/u/jlblack)\
**Post date:** [April 23, 2026, 7:18pm UTC](https://forum.inductiveautomation.com/t/how-to-download-and-install-maker/115222/1 "2026-04-23T19:18:56Z")

</div>

Ok call me clueless, but how do you install Maker? I have the account, the license and the code but I cannot find a downlink page. What is the secret?

Cheers and thanks!!

---

<div class="post-metadata">

**Author:** ![Cade\_Allen](https://avatars.discourse-cdn.com/v4/letter/c/db5fbb/32.png) [@Cade\_Allen](https://forum.inductiveautomation.com/u/Cade_Allen)\
**Post date:** [April 23, 2026, 7:21pm UTC](https://forum.inductiveautomation.com/t/how-to-download-and-install-maker/115222/2 "2026-04-23T19:21:11Z")

</div>

Download Ignition [here](https://inductiveautomation.com/downloads/), and then go through the installer. When the gateway first starts, go to the gateway webpage at localhost:8088, and it will prompt you for the edition you want to run (Standard, Edge, or Maker).

---

<div class="post-metadata">

**Author:** ![jlblack](https://avatars.discourse-cdn.com/v4/letter/j/c68b51/32.png) [@jlblack](https://forum.inductiveautomation.com/u/jlblack)\
**Post date:** [April 23, 2026, 7:22pm UTC](https://forum.inductiveautomation.com/t/how-to-download-and-install-maker/115222/3 "2026-04-23T19:22:46Z")

</div>

Thank you I was considering that but wanted to make sure...

CHeers