# How to expand error level diagnostic logs

**URL:** <https://forum.inductiveautomation.com/t/how-to-expand-error-level-diagnostic-logs/38333>\
**Category:** Ignition\
**Created:** [September 2, 2020, 10:08pm UTC](https://forum.inductiveautomation.com/t/how-to-expand-error-level-diagnostic-logs/38333 "2020-09-02T22:08:23Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![m.sanders](https://avatars.discourse-cdn.com/v4/letter/m/df705f/32.png) [@m.sanders](https://forum.inductiveautomation.com/u/m.sanders)\
**Post date:** [September 2, 2020, 10:41pm UTC](https://forum.inductiveautomation.com/t/how-to-expand-error-level-diagnostic-logs/38333/3 "2020-09-02T22:41:19Z")

</div>

I've never seen that "+" though on any of my logged items, while I've seen other people with seemingly the same error with a stack track.  
For example:

 ![Capture](https://us1.discourse-cdn.com/inductiveautomation/original/3X/d/7/d73c750ff3dd7f99e07b6e0e39b0d16adb753537.png)

> [@DatasourceAuditProfile messages in log](http://forum.inductiveautomation.com/t/datasourceauditprofile-messages-in-log/21411):
>
> After adding some gateway scripts and changing alarm configuration on some tags I noticed some “DatasourceAuditProfile” messages in the log. They appeared after I saved and published the project and did not re-occur overnight. The verbose messages seem to be pointing toward the “tag edit” action on the alarm configuration changes I was doing. Should I be concerned about these?

---

_[View the full topic](https://forum.inductiveautomation.com/t/how-to-expand-error-level-diagnostic-logs/38333)._