# How to Generate a List of all Configured Alarms

**URL:** <https://forum.inductiveautomation.com/t/how-to-generate-a-list-of-all-configured-alarms/36651>\
**Category:** Ignition\
**Created:** [July 13, 2020, 5:09pm UTC](https://forum.inductiveautomation.com/t/how-to-generate-a-list-of-all-configured-alarms/36651 "2020-07-13T17:09:33Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![jaspinall](https://avatars.discourse-cdn.com/v4/letter/j/a587f6/32.png) [@jaspinall](https://forum.inductiveautomation.com/u/jaspinall)\
**Post date:** [July 14, 2020, 3:20pm UTC](https://forum.inductiveautomation.com/t/how-to-generate-a-list-of-all-configured-alarms/36651/3 "2020-07-14T15:20:22Z")

</div>

Thanks for the reply @jonathan.taylor

I did find this method earlier on some older posts, however, after experimenting with it i've noticed that it does not grab all the alarms.

There is another post below that mentions this as well:

> [@Best way to generate an alarm list](http://forum.inductiveautomation.com/t/best-way-to-generate-an-alarm-list/11773/4):
>
> Sorry all… but, I’ve tried to use the queryStatus above to get a list of all alarms, however I only get 27 alarms returned, where there should be hundreds. I ran this in two locations: my local dev environment, no connection to PLCs where I got the 27 alarms; I also ran it on the production gateway where it returned a large number of alarms. I’m now not confident the “full” alarm list that I gave the customer using this function is in fact a full list at all… Why would these results be differen…

Maybe a good feature request.

---

_[View the full topic](https://forum.inductiveautomation.com/t/how-to-generate-a-list-of-all-configured-alarms/36651)._