# How to get value from rpi into Igntion

**URL:** <https://forum.inductiveautomation.com/t/how-to-get-value-from-rpi-into-igntion/40374>\
**Category:** Maker\
**Created:** [November 5, 2020, 8:51pm UTC](https://forum.inductiveautomation.com/t/how-to-get-value-from-rpi-into-igntion/40374 "2020-11-05T20:51:54Z")\
**Posts on this page:** 1\
**Showing post:** 26

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [December 15, 2020, 1:07pm UTC](https://forum.inductiveautomation.com/t/how-to-get-value-from-rpi-into-igntion/40374/26 "2020-12-15T13:07:11Z")

</div>

Jython cannot load the shared libraries that provide full access to the GPIO pins. The `pigpiod` service is your best bet, but no-one has taken the time to test/deploy in jython yet.

> [@Maker and Rasbery pi & Jetson nano GPIO access](http://forum.inductiveautomation.com/t/maker-and-rasbery-pi-jetson-nano-gpio-access/36344/2):
>
> I recommend running the [pigpiod](https://github.com/joan2937/pigpio) daemon and connecting to its socket interface from a long-lived asynchronous thread. The client-side python module for that project looks jython-compatible, but you might want to optimize it. Python’s socket module is notoriously laggy in jython.

---

_[View the full topic](https://forum.inductiveautomation.com/t/how-to-get-value-from-rpi-into-igntion/40374)._