# How to have identical projects in the same gateway **URL:** \ **Category:** Ignition\ **Tags:** perspective\ **Created:** [May 13, 2026, 5:57pm UTC](https://forum.inductiveautomation.com/t/how-to-have-identical-projects-in-the-same-gateway/115518 "2026-05-13T17:57:57Z")\ **Posts on this page:** 1\ **Showing post:** 7
**Author:** ![Chris\_Bingham](https://avatars.discourse-cdn.com/v4/letter/c/e5b9ba/32.png) [@Chris\_Bingham](https://forum.inductiveautomation.com/u/Chris_Bingham)\ **Post date:** [May 15, 2026, 7:13pm UTC](https://forum.inductiveautomation.com/t/how-to-have-identical-projects-in-the-same-gateway/115518/7 "2026-05-15T19:13:06Z")
Took me a minute to find the post, but I remember this from a little while back (use the primary **view** to write to the **page** , which each of your docked **views** shares with the main): > [@Perspective URL props to docked window](https://forum.inductiveautomation.com/t/perspective-url-props-to-docked-window/38550/3): > > Fundamentally, you’re right - this shouldn’t be so difficult. Perhaps we should simply set the page URL parameters on all views that have the proper input defined. So for example, if you had the page mounted at /mypage/:paramName and both your primary view and a docked view defined an input named paramName, we could simply set both. In the meantime, however, there is an easier way than passing messages, which as you surmised, is not really that safe (you can’t rely on one view loading before th… --- _[View the full topic](https://forum.inductiveautomation.com/t/how-to-have-identical-projects-in-the-same-gateway/115518)._