# How to Integrate Ignition with AWS IoT?

**URL:** <https://forum.inductiveautomation.com/t/how-to-integrate-ignition-with-aws-iot/97446>\
**Category:** Ignition\
**Created:** [October 18, 2024, 9:30am UTC](https://forum.inductiveautomation.com/t/how-to-integrate-ignition-with-aws-iot/97446 "2024-10-18T09:30:36Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![rowekeg\_abaot](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/rowekeg_abaot/32/68718_2.png) [@rowekeg\_abaot](https://forum.inductiveautomation.com/u/rowekeg_abaot)\
**Post date:** [October 18, 2024, 9:30am UTC](https://forum.inductiveautomation.com/t/how-to-integrate-ignition-with-aws-iot/97446/1 "2024-10-18T09:30:36Z")

</div>

Hey guys....... 👋

I am relatively new to the Ignition platform and am currently exploring ways to integrate it with AWS IoT for a project I'm working on. My goal is to send data from Ignition to AWS IoT and then process it further for analytics and monitoring.

I have read through the Ignition documentation and found some resources, but I’m still unsure about the best approach to take.

Is there a preferred method for connecting Ignition to AWS IoT? Are there any specific modules or configurations I should be aware of?

What steps do I need to follow to set up the connection? I’m looking for guidance on things like setting up AWS IoT policies, creating certificates, and any specific settings in Ignition that I should adjust.

I also check this: [https://forum.inductiveautomation.com/t/issue-with-reading-string-tags-from-netlink-s7-driver](https://forum.inductiveautomation.com/t/issue-with-reading-string-tags-from-netlink-s7-driver/96888)[mendix](https://www.igmguru.com/digital-marketing-programming/mendix-training) But I have not found any solution. Could anyone guide me about this? Are there any common pitfalls I should avoid? It would be great to hear about any challenges others have faced when integrating these two platforms.

Thanks in advance!

Respected community member! 🥰

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [October 18, 2024, 11:07am UTC](https://forum.inductiveautomation.com/t/how-to-integrate-ignition-with-aws-iot/97446/2 "2024-10-18T11:07:26Z")

</div>

I haven't used it, but I would expect Cirrus Link's AWS Injector Module is what you need:

> **[Strategic Partner Modules | Inductive Automation](https://inductiveautomation.com/downloads/third-party-modules/8.1.43)**
>
> Download and start using the world's most powerful SCADA software in just minutes. Cross-platform, with installers
> available for multiple operating systems.