# How to manage OPC UA redundancy

**URL:** <https://forum.inductiveautomation.com/t/how-to-manage-opc-ua-redundancy/33817>\
**Category:** General Discussion\
**Created:** [April 9, 2020, 12:09pm UTC](https://forum.inductiveautomation.com/t/how-to-manage-opc-ua-redundancy/33817 "2020-04-09T12:09:10Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![darioazzolari](https://avatars.discourse-cdn.com/v4/letter/d/b2d939/32.png) [@darioazzolari](https://forum.inductiveautomation.com/u/darioazzolari)\
**Post date:** [April 9, 2020, 12:09pm UTC](https://forum.inductiveautomation.com/t/how-to-manage-opc-ua-redundancy/33817/1 "2020-04-09T12:09:10Z")

</div>

Hi everyone,  
I have to manage a redundancy between two Kepware OPC UA located in 2 different servers.  
How to set the failover in order to read back from both redundancy gateway once the master OPC UA is back to normal?

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [April 9, 2020, 12:46pm UTC](https://forum.inductiveautomation.com/t/how-to-manage-opc-ua-redundancy/33817/2 "2020-04-09T12:46:09Z")

</div>

This is not something that can be done without manually forcing a reconnect right now (edit/save the connection making no changes).

It’s in scope on some enhancements to the failover functionality we have planned for later this year.

---

<div class="post-metadata">

**Author:** ![darioazzolari](https://avatars.discourse-cdn.com/v4/letter/d/b2d939/32.png) [@darioazzolari](https://forum.inductiveautomation.com/u/darioazzolari)\
**Post date:** [April 10, 2020, 5:56am UTC](https://forum.inductiveautomation.com/t/how-to-manage-opc-ua-redundancy/33817/3 "2020-04-10T05:56:43Z")

</div>

Thank you for the support.