# How to trigger configureCell in power table and is it possible to know who triggered it? **URL:** \ **Category:** Ignition\ **Tags:** ignition80, vision\ **Created:** [October 30, 2021, 1:55am UTC](https://forum.inductiveautomation.com/t/how-to-trigger-configurecell-in-power-table-and-is-it-possible-to-know-who-triggered-it/52525 "2021-10-30T01:55:35Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [October 30, 2021, 4:10pm UTC](https://forum.inductiveautomation.com/t/how-to-trigger-configurecell-in-power-table-and-is-it-possible-to-know-who-triggered-it/52525/4 "2021-10-30T16:10:05Z")
This topic has more detail on this subject: > [@Bug Report: Power Table configureCell()](https://forum.inductiveautomation.com/t/bug-report-power-table-configurecell/51315): > > There’s a bug in the configureCell() extension function on the Power Table component in Vision. I tested on 8.1 and 7.9, both of which have the bug. When selecting a row from a power table, configureCell() does not execute for all cells. Instead, the cells it executes on depend on the index of the selected row. There appears to be a logical bug in how the cells are looped over. To reproduce the bug: Create a Power Table and populate it with 5 values in one column of data. The bug is present… --- _[View the full topic](https://forum.inductiveautomation.com/t/how-to-trigger-configurecell-in-power-table-and-is-it-possible-to-know-who-triggered-it/52525)._