# Hub and Spoke Gateway Setup - Sites with Central hub

**URL:** <https://forum.inductiveautomation.com/t/hub-and-spoke-gateway-setup-sites-with-central-hub/114545>\
**Category:** Ignition\
**Created:** [March 18, 2026, 7:53am UTC](https://forum.inductiveautomation.com/t/hub-and-spoke-gateway-setup-sites-with-central-hub/114545 "2026-03-18T07:53:44Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![Noah\_Burnette](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/noah_burnette/32/83777_2.png) [@Noah\_Burnette](https://forum.inductiveautomation.com/u/Noah_Burnette)\
**Post date:** [March 20, 2026, 1:00pm UTC](https://forum.inductiveautomation.com/t/hub-and-spoke-gateway-setup-sites-with-central-hub/114545/7 "2026-03-20T13:00:16Z")

</div>

Hi Nick,

I would push for a single project and drive your application entirely on configuration. Project inheritance for me has always been a headache (multiple designers, delayed updates, etc) and is the last tool I reach for.

For 5-10 gateways the GAN is manageable from a configuration standpoint but anything past that I would look to decouple those connections to something like a broker like @tgarrison said.

Hope this helps!

---

_[View the full topic](https://forum.inductiveautomation.com/t/hub-and-spoke-gateway-setup-sites-with-central-hub/114545)._