# "I cannot connect to Ignition Edge.

**URL:** <https://forum.inductiveautomation.com/t/i-cannot-connect-to-ignition-edge/93580>\
**Category:** General Discussion\
**Created:** [July 23, 2024, 5:58am UTC](https://forum.inductiveautomation.com/t/i-cannot-connect-to-ignition-edge/93580 "2024-07-23T05:58:23Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![tien\_trinh](https://avatars.discourse-cdn.com/v4/letter/t/ecae2f/32.png) [@tien\_trinh](https://forum.inductiveautomation.com/u/tien_trinh)\
**Post date:** [July 23, 2024, 5:58am UTC](https://forum.inductiveautomation.com/t/i-cannot-connect-to-ignition-edge/93580/1 "2024-07-23T05:58:23Z")

</div>

Currently, I cannot connect to Ignition Edge because I changed the HTTPS Port to 8088 in the ConfigNetworkWeb Server section. After making the change, I could not reconnect.

 ![z5658059167072_11637e279e72b514d434d61d31b1a82c](https://us1.discourse-cdn.com/inductiveautomation/original/3X/6/e/6ed94e3af4f1ba191ea7ab049206e92e081f945b.jpeg)

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [July 23, 2024, 11:05am UTC](https://forum.inductiveautomation.com/t/i-cannot-connect-to-ignition-edge/93580/2 "2024-07-23T11:05:18Z")

</div>

Use the gwcmd.sh tool from a terminal to change the port back to 8043.

---

<div class="post-metadata">

**Author:** ![tien\_trinh](https://avatars.discourse-cdn.com/v4/letter/t/ecae2f/32.png) [@tien\_trinh](https://forum.inductiveautomation.com/u/tien_trinh)\
**Post date:** [July 29, 2024, 9:14am UTC](https://forum.inductiveautomation.com/t/i-cannot-connect-to-ignition-edge/93580/3 "2024-07-29T09:14:02Z")

</div>

Do you have a link to the instructions or a picture of the command? I've tried several times but still can't get it to work

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/7/c/7ced25c558c3d3a55d24f7620ea814562b500e81.png)

---

<div class="post-metadata">

**Author:** ![Matrix\_Engineering](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/matrix_engineering/32/19781_2.png) [@Matrix\_Engineering](https://forum.inductiveautomation.com/u/Matrix_Engineering)\
**Post date:** [July 29, 2024, 9:23am UTC](https://forum.inductiveautomation.com/t/i-cannot-connect-to-ignition-edge/93580/4 "2024-07-29T09:23:43Z")

</div>

> **[Gateway Command-line Utility - gwcmd | Ignition User Manual](https://docs.inductiveautomation.com/docs/8.1/platform/gateway/gateway-command-line-utility-gwcmd#command-line-utility-gwcmd-options)**
>
> The Gateway Command-line Utility provides a list of commands you can use to perform specific functions in the Gateway. The Gateway Command-line Utility or gwcmd provides basic commands, such as resetting the main password, changing the Gateway's...

`gwcmd -l, --sslport 8043`