# I dragged png images to Ingition, but they are showing an red x and have not loaded **URL:** \ **Category:** Ignition\ **Tags:** vision\ **Created:** [August 22, 2024, 6:44pm UTC](https://forum.inductiveautomation.com/t/i-dragged-png-images-to-ingition-but-they-are-showing-an-red-x-and-have-not-loaded/95032 "2024-08-22T18:44:04Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Hasan\_Fetahi](https://avatars.discourse-cdn.com/v4/letter/h/f17d59/32.png) [@Hasan\_Fetahi](https://forum.inductiveautomation.com/u/Hasan_Fetahi)\ **Post date:** [August 22, 2024, 6:44pm UTC](https://forum.inductiveautomation.com/t/i-dragged-png-images-to-ingition-but-they-are-showing-an-red-x-and-have-not-loaded/95032/1 "2024-08-22T18:44:04Z")
Greetings, I'm dragging multiple png images on the image icon in vision, but when I click on the image browser after uploading my images, I get a red mark on some of the images, and they are not visible to me. Note: The first image worked, but when I added 5 more images, these images have a red mark on the image browser. May you assist me with this issue? ---
**Author:** ![Benjamin\_Furlani](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/benjamin_furlani/32/66084_2.png) [@Benjamin\_Furlani](https://forum.inductiveautomation.com/u/Benjamin_Furlani)\ **Post date:** [August 23, 2024, 12:02am UTC](https://forum.inductiveautomation.com/t/i-dragged-png-images-to-ingition-but-they-are-showing-an-red-x-and-have-not-loaded/95032/2 "2024-08-23T00:02:44Z")
1. Can you provide some screenshots? 2. Are you getting any errors in the Gateway Logs under `Status > Logs`? 3. Have you tried to remove them from the Image Management and uploading them without dragging and dropping? ---
**Author:** ![Hasan\_Fetahi](https://avatars.discourse-cdn.com/v4/letter/h/f17d59/32.png) [@Hasan\_Fetahi](https://forum.inductiveautomation.com/u/Hasan_Fetahi)\ **Post date:** [August 23, 2024, 4:09pm UTC](https://forum.inductiveautomation.com/t/i-dragged-png-images-to-ingition-but-they-are-showing-an-red-x-and-have-not-loaded/95032/3 "2024-08-23T16:09:35Z")
Greetings Ben, Sure, Attached below are the pictures and background information. Background pertaining to issue: - each picture size is roughly ~ 1,000 KB and type is .png - Using vision for graphics and img icon. ![Screenshot 2024-08-23 115715](https://us1.discourse-cdn.com/inductiveautomation/original/3X/6/0/60b33d09cb8f08abe1adff7a3e2fde0e7b2bf59e.png) ![Screenshot 2024-08-23 120108](https://us1.discourse-cdn.com/inductiveautomation/original/3X/3/2/32f4eec0725324d95b03e4da4fb580e4f74bbb43.png) 1. I went on the status -\> diagnostic -\> logs, but there are no errors. 2. Since this is an VM that my ignition runs on, what are the steps to do this? ---
**Author:** ![Benjamin\_Furlani](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/benjamin_furlani/32/66084_2.png) [@Benjamin\_Furlani](https://forum.inductiveautomation.com/u/Benjamin_Furlani)\ **Post date:** [August 23, 2024, 6:48pm UTC](https://forum.inductiveautomation.com/t/i-dragged-png-images-to-ingition-but-they-are-showing-an-red-x-and-have-not-loaded/95032/4 "2024-08-23T18:48:45Z")
Are you running the designer in the VM as well? ---
**Author:** ![Hasan\_Fetahi](https://avatars.discourse-cdn.com/v4/letter/h/f17d59/32.png) [@Hasan\_Fetahi](https://forum.inductiveautomation.com/u/Hasan_Fetahi)\ **Post date:** [August 26, 2024, 1:05pm UTC](https://forum.inductiveautomation.com/t/i-dragged-png-images-to-ingition-but-they-are-showing-an-red-x-and-have-not-loaded/95032/5 "2024-08-26T13:05:14Z")
I'm running the designer application on this VM. ---
**Author:** ![Benjamin\_Furlani](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/benjamin_furlani/32/66084_2.png) [@Benjamin\_Furlani](https://forum.inductiveautomation.com/u/Benjamin_Furlani)\ **Post date:** [August 26, 2024, 1:42pm UTC](https://forum.inductiveautomation.com/t/i-dragged-png-images-to-ingition-but-they-are-showing-an-red-x-and-have-not-loaded/95032/6 "2024-08-26T13:42:46Z")
Did you drag the images from your host to the VM? Sometimes I have had to put the files onto the VM itself and then to the Image Management