# I have connected Tia Portal to ignition using NetToPlcsim and I'am searching a methode to create all tags of PLC into ignition

**URL:** <https://forum.inductiveautomation.com/t/i-have-connected-tia-portal-to-ignition-using-nettoplcsim-and-iam-searching-a-methode-to-create-all-tags-of-plc-into-ignition/91881>\
**Category:** Ignition\
**Tags:** ignition81\
**Created:** [June 14, 2024, 4:11pm UTC](https://forum.inductiveautomation.com/t/i-have-connected-tia-portal-to-ignition-using-nettoplcsim-and-iam-searching-a-methode-to-create-all-tags-of-plc-into-ignition/91881 "2024-06-14T16:11:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![sebastien\_ng](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/sebastien_ng/32/55297_2.png) [@sebastien\_ng](https://forum.inductiveautomation.com/u/sebastien_ng)\
**Post date:** [June 14, 2024, 4:11pm UTC](https://forum.inductiveautomation.com/t/i-have-connected-tia-portal-to-ignition-using-nettoplcsim-and-iam-searching-a-methode-to-create-all-tags-of-plc-into-ignition/91881/1 "2024-06-14T16:11:18Z")

</div>

Hello,  
I have connected Tia portal with ignition. now, I would like create all tag on ignition. But I don't know how do it.  
someone know how can I create this tags on ignition

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/e/e/ee90e053efa21319527d5e20c1b577067fc8fca6.png)

I tried to create one by one but I think it is not I good solution if i have 400 tags.

---

<div class="post-metadata">

**Author:** ![leonardo.godoi](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/leonardo.godoi/32/27178_2.png) [@leonardo.godoi](https://forum.inductiveautomation.com/u/leonardo.godoi)\
**Post date:** [June 14, 2024, 4:39pm UTC](https://forum.inductiveautomation.com/t/i-have-connected-tia-portal-to-ignition-using-nettoplcsim-and-iam-searching-a-methode-to-create-all-tags-of-plc-into-ignition/91881/2 "2024-06-14T16:39:05Z")

</div>

If you don't have OPC set up, which has very limited performance anyway, your only option with Siemens might be creating tags one by one or, as I did a while ago, creating a script that will read this table of tags when exported and create the tags accordingly.