# IA Demo Project

**URL:** <https://forum.inductiveautomation.com/t/ia-demo-project/1924>\
**Category:** Ignition\
**Created:** [June 10, 2010, 6:28pm UTC](https://forum.inductiveautomation.com/t/ia-demo-project/1924 "2010-06-10T18:28:34Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![jim\_lapratt](https://avatars.discourse-cdn.com/v4/letter/j/cc9497/32.png) [@jim\_lapratt](https://forum.inductiveautomation.com/u/jim_lapratt)\
**Post date:** [June 10, 2010, 6:28pm UTC](https://forum.inductiveautomation.com/t/ia-demo-project/1924/1 "2010-06-10T18:28:34Z")

</div>

Just an FYI…

The readme.txt file in the demo project says:

“1) Make sure you have Ignition 7.1.2 or above. If you do not have Ignition 7.1.2 please download it from [inductiveautomation.com/downloads](http://www.inductiveautomation.com/downloads).  
To check for you Ignition version please login to the Ignition Gateway Configuration section and check under System -\> Status.”

I don’t see 7.1.2 on downloads page.

Jim

---

<div class="post-metadata">

**Author:** ![Travis.Cox](https://avatars.discourse-cdn.com/v4/letter/t/b9bd4f/32.png) [@Travis.Cox](https://forum.inductiveautomation.com/u/Travis.Cox)\
**Post date:** [June 10, 2010, 8:17pm UTC](https://forum.inductiveautomation.com/t/ia-demo-project/1924/2 "2010-06-10T20:17:36Z")

</div>

Right, the demo project needs the updated simulator module that is available in 7.1.2 but we have not released it yet. Until we release, you can download the Allen-Bradley Drivers-module.modl from the development section and install it.

---

<div class="post-metadata">

**Author:** ![Robert](https://avatars.discourse-cdn.com/v4/letter/r/e95f7d/32.png) [@Robert](https://forum.inductiveautomation.com/u/Robert)\
**Post date:** [June 10, 2010, 9:37pm UTC](https://forum.inductiveautomation.com/t/ia-demo-project/1924/3 "2010-06-10T21:37:32Z")

</div>

You can also down load 7.1.2Beta from the development section

---

<div class="post-metadata">

**Author:** ![jim\_lapratt](https://avatars.discourse-cdn.com/v4/letter/j/cc9497/32.png) [@jim\_lapratt](https://forum.inductiveautomation.com/u/jim_lapratt)\
**Post date:** [June 11, 2010, 12:58pm UTC](https://forum.inductiveautomation.com/t/ia-demo-project/1924/4 "2010-06-11T12:58:11Z")

</div>

Thanks guys, thought it might have been a typeO…

Jim

---

<div class="post-metadata">

**Author:** ![jim\_lapratt](https://avatars.discourse-cdn.com/v4/letter/j/cc9497/32.png) [@jim\_lapratt](https://forum.inductiveautomation.com/u/jim_lapratt)\
**Post date:** [June 11, 2010, 2:18pm UTC](https://forum.inductiveautomation.com/t/ia-demo-project/1924/5 "2010-06-11T14:18:58Z")

</div>

Robert,

Even after installing the Beta you still need to install the Allen-Bradley module, least I did. I also had to re-boot to allow the log in, not sure why.