# IA Website Links Broken

**URL:** <https://forum.inductiveautomation.com/t/ia-website-links-broken/9129>\
**Category:** General Discussion\
**Created:** [October 1, 2014, 5:27pm UTC](https://forum.inductiveautomation.com/t/ia-website-links-broken/9129 "2014-10-01T17:27:10Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![srosbury](https://avatars.discourse-cdn.com/v4/letter/s/a88e57/32.png) [@srosbury](https://forum.inductiveautomation.com/u/srosbury)\
**Post date:** [October 1, 2014, 5:27pm UTC](https://forum.inductiveautomation.com/t/ia-website-links-broken/9129/1 "2014-10-01T17:27:10Z")

</div>

I was trying to get to earlier versions of FactoryPMI and FactorySQL for a conversion  
project to the new version for a client and noticed these broken links from main linkbar  
on the site by selecting the “Ignition SCADA-\>Legacy Software” links:

[support.inductiveautomation.com/legacy](https://support.inductiveautomation.com/legacy)  
[support.inductiveautomation.com … factorysql](https://support.inductiveautomation.com/legacy/factorysql)  
[support.inductiveautomation.com … factorypmi](https://support.inductiveautomation.com/legacy/factorypmi)  
[support.inductiveautomation.com … el-edition](https://support.inductiveautomation.com/legacy/vision-panel-edition)

PS: Where can I get a trial version of FactoryPMI 1.8.6 and FactorySQL 2.3.5?

Cordially,  
Steven Rosbury  
Miller-Eads Automation

---

<div class="post-metadata">

**Author:** ![Colby.Clegg](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/colby.clegg/32/3282_2.png) [@Colby.Clegg](https://forum.inductiveautomation.com/u/Colby.Clegg)\
**Post date:** [October 3, 2014, 4:03pm UTC](https://forum.inductiveautomation.com/t/ia-website-links-broken/9129/2 "2014-10-03T16:03:03Z")

</div>

Hi,

I’ve passed this on to the web team.

I don’t think you’re going to be able to find those particular versions, as they’re very old, but you can get the last versions of the products from the [downloads section](https://inductiveautomation.com/downloads/legacy), by clicking on “Legacy” on the left hand side. I don’t think you should have a problem upgrading to those versions, before then going on to Ignition, if you want.

Regards,