# IADemo Pump component

**URL:** <https://forum.inductiveautomation.com/t/iademo-pump-component/9585>\
**Category:** Ignition\
**Created:** [January 21, 2015, 6:09pm UTC](https://forum.inductiveautomation.com/t/iademo-pump-component/9585 "2015-01-21T18:09:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![kevinmarchand](https://avatars.discourse-cdn.com/v4/letter/k/439d5e/32.png) [@kevinmarchand](https://forum.inductiveautomation.com/u/kevinmarchand)\
**Post date:** [January 21, 2015, 6:09pm UTC](https://forum.inductiveautomation.com/t/iademo-pump-component/9585/1 "2015-01-21T18:09:18Z")

</div>

Hi in the IADemo on the HMI Optimization page.  
How the Optimize white pump have been made?

---

<div class="post-metadata">

**Author:** ![SeanT](https://avatars.discourse-cdn.com/v4/letter/s/df788c/32.png) [@SeanT](https://forum.inductiveautomation.com/u/SeanT)\
**Post date:** [January 22, 2015, 4:24pm UTC](https://forum.inductiveautomation.com/t/iademo-pump-component/9585/2 "2015-01-22T16:24:19Z")

</div>

If I’m thinking of the same thing you are, select the object, then click the Shape menu -\> Union.