# Identity Provider Not Displayed In Project Properties

**URL:** <https://forum.inductiveautomation.com/t/identity-provider-not-displayed-in-project-properties/23764>\
**Category:** Ignition Early Access\
**Created:** [April 1, 2019, 7:49pm UTC](https://forum.inductiveautomation.com/t/identity-provider-not-displayed-in-project-properties/23764 "2019-04-01T19:49:18Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![SMcIntosh](https://avatars.discourse-cdn.com/v4/letter/s/a6a055/32.png) [@SMcIntosh](https://forum.inductiveautomation.com/u/SMcIntosh)\
**Post date:** [April 1, 2019, 7:49pm UTC](https://forum.inductiveautomation.com/t/identity-provider-not-displayed-in-project-properties/23764/1 "2019-04-01T19:49:18Z")

</div>

I can’t log in to my perspective client (with the login event) using any alternative user sources. I know the sources themselves are set up correctly - when set to the gateway default user source I can log in with them - but when I set them as the default user source for a project, the login fails to recognize username/password combinations other than those in default.

Does anyone have any idea what I may be doing wrong?

---

<div class="post-metadata">

**Author:** ![osolorzano](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/osolorzano/32/6432_2.png) [@osolorzano](https://forum.inductiveautomation.com/u/osolorzano)\
**Post date:** [April 1, 2019, 8:01pm UTC](https://forum.inductiveautomation.com/t/identity-provider-not-displayed-in-project-properties/23764/2 "2019-04-01T20:01:10Z")

</div>

In your Project Properties for Perspective, do you have the Identity Provider set to the user source you are attempting to use?

 ![identity](https://us1.discourse-cdn.com/inductiveautomation/original/2X/a/a02003f7ee26494acce398f638a8f14fa6fdf462.png)

---

<div class="post-metadata">

**Author:** ![SMcIntosh](https://avatars.discourse-cdn.com/v4/letter/s/a6a055/32.png) [@SMcIntosh](https://forum.inductiveautomation.com/u/SMcIntosh)\
**Post date:** [April 1, 2019, 8:30pm UTC](https://forum.inductiveautomation.com/t/identity-provider-not-displayed-in-project-properties/23764/3 "2019-04-01T20:30:11Z")

</div>

I do not - but unfortunately, my new user source does not show up as an option here (it is an AD source, if that makes a difference).

![image](https://us1.discourse-cdn.com/inductiveautomation/original/2X/a/a8f593f3c44cfe25813112831346a52dd8e3f65d.png)

---

<div class="post-metadata">

**Author:** ![osolorzano](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/osolorzano/32/6432_2.png) [@osolorzano](https://forum.inductiveautomation.com/u/osolorzano)\
**Post date:** [April 1, 2019, 8:56pm UTC](https://forum.inductiveautomation.com/t/identity-provider-not-displayed-in-project-properties/23764/4 "2019-04-01T20:56:43Z")

</div>

In that case, you will have to go to your gateway and go to Config \> Identity Providers and create a new one. Then select Ignition for the host, then on the next step select your AD source as the user source. That will allow you to use it for the identity provider.

---

<div class="post-metadata">

**Author:** ![SMcIntosh](https://avatars.discourse-cdn.com/v4/letter/s/a6a055/32.png) [@SMcIntosh](https://forum.inductiveautomation.com/u/SMcIntosh)\
**Post date:** [April 1, 2019, 9:10pm UTC](https://forum.inductiveautomation.com/t/identity-provider-not-displayed-in-project-properties/23764/5 "2019-04-01T21:10:33Z")

</div>

That did it! Thanks for the help.