# \[IGN-13145\] Event Stream Showing Not Running

**URL:** <https://forum.inductiveautomation.com/t/ign-13145-event-stream-showing-not-running/110262>\
**Category:** Ignition 8.3 Early Access\
**Created:** [August 29, 2025, 3:10am UTC](https://forum.inductiveautomation.com/t/ign-13145-event-stream-showing-not-running/110262 "2025-08-29T03:10:45Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![David\_Stone](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/david_stone/32/79749_2.png) [@David\_Stone](https://forum.inductiveautomation.com/u/David_Stone)\
**Post date:** [August 29, 2025, 3:10am UTC](https://forum.inductiveautomation.com/t/ign-13145-event-stream-showing-not-running/110262/1 "2025-08-29T03:10:45Z")

</div>

If you have the Event Streams dashboard open on one of your Event Streams in Designer, reboot the gateway and do not exit the Designer. When the Designer reconnects to the Gateway, the open stream is listed as "stopped" when it is in fact running.

 ![Screenshot 2025-08-29 at 12.32.43](https://us1.discourse-cdn.com/inductiveautomation/original/3X/c/c/cc2ea80e82a7b86454c24d0e7a1ab6a2190254a5.png)  
To fix, disable the stream, save and re-enable the stream then save again. Now it will work fine in the Designer.

---

<div class="post-metadata">

**Author:** ![apadilla](https://avatars.discourse-cdn.com/v4/letter/a/4bbf92/32.png) [@apadilla](https://forum.inductiveautomation.com/u/apadilla)\
**Post date:** [August 29, 2025, 3:46pm UTC](https://forum.inductiveautomation.com/t/ign-13145-event-stream-showing-not-running/110262/2 "2025-08-29T15:46:05Z")

</div>

Hello David, this is a known issue our dev team is actively looking into. Thanks for checking out our new feature and posting the current work around!