# \[IGN-3037\] Refresh Perspective Alarm Status and Journal

**URL:** <https://forum.inductiveautomation.com/t/ign-3037-refresh-perspective-alarm-status-and-journal/50714>\
**Category:** Ignition\
**Tags:** perspective\
**Created:** [September 8, 2021, 2:43pm UTC](https://forum.inductiveautomation.com/t/ign-3037-refresh-perspective-alarm-status-and-journal/50714 "2021-09-08T14:43:49Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![zxcslo](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/zxcslo/32/61610_2.png) [@zxcslo](https://forum.inductiveautomation.com/u/zxcslo)\
**Post date:** [October 22, 2021, 11:11am UTC](https://forum.inductiveautomation.com/t/ign-3037-refresh-perspective-alarm-status-and-journal/50714/2 "2021-10-22T11:11:35Z")

</div>

I would like to know this as well…  
Today I stumbled at this when I try to show the Alarm Journal Table with Display Path (in my case ‘Stroj’) filters active in a popup.  
When the popup is shown, the Journal table shows all alarms (regardless of the display path), and then after refresh rate (I set it to 10 seconds), it shows what it should… only the alarms with display path set to ‘filter’.  
 ![AlarmJournalTableRefresh](https://us1.discourse-cdn.com/inductiveautomation/original/3X/d/2/d265ae14cbf2b4d3ed6db87c3324c7e44b9cb245.gif)

---

_[View the full topic](https://forum.inductiveautomation.com/t/ign-3037-refresh-perspective-alarm-status-and-journal/50714)._