# \[IGN-3831\]Running Scripts Blank Description **URL:** \ **Category:** Ignition\ **Tags:** ignition81\ **Created:** [November 15, 2021, 11:07am UTC](https://forum.inductiveautomation.com/t/ign-3831-running-scripts-blank-description/53065 "2021-11-15T11:07:11Z")\ **Posts on this page:** 1\ **Showing post:** 7
**Author:** ![deon.korb](https://avatars.discourse-cdn.com/v4/letter/d/8c91f0/32.png) [@deon.korb](https://forum.inductiveautomation.com/u/deon.korb)\ **Post date:** [November 15, 2021, 4:43pm UTC](https://forum.inductiveautomation.com/t/ign-3831-running-scripts-blank-description/53065/7 "2021-11-15T16:43:33Z")
I was testing this: > [@\[IGN-4921\]Alarm Aggregation/Summary](https://forum.inductiveautomation.com/t/alarm-aggregation-summary/52169): > > Hi, I would like to know what the best way is to get a summary of the alarms on a UDT. What I need is the highest priority active alarm (for a colour around the UDT symbol) and if there are any unacknowledged alarms (to blink). I need to do this for about 50 UDTs on a page with about 100 clients active. I see the following options: Use an expression tag on the UDT that monitors all configured alarms and presents a summary integer (priority code and negative if unacked). Similar to below: if… Turns out my original strategy of an expression tag on the UDT is so far the lightest on the Gateway. I'm still looking for the best way --- _[View the full topic](https://forum.inductiveautomation.com/t/ign-3831-running-scripts-blank-description/53065)._