# \[IGN-5692\]Designer showing °C as °C in Perspective Label in Embedded View **URL:** \ **Category:** Ignition\ **Tags:** perspective\ **Created:** [November 16, 2022, 10:33am UTC](https://forum.inductiveautomation.com/t/ign-5692-designer-showing-c-as-a-c-in-perspective-label-in-embedded-view/66579 "2022-11-16T10:33:01Z")\ **Posts on this page:** 1\ **Showing post:** 13
**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\ **Post date:** [November 16, 2022, 6:01pm UTC](https://forum.inductiveautomation.com/t/ign-5692-designer-showing-c-as-a-c-in-perspective-label-in-embedded-view/66579/13 "2022-11-16T18:01:17Z")
Possibly the same root cause as this other thread: > [@\[IGN-5692\] Tagpaths with åäö not found in Embedded Veiw](https://forum.inductiveautomation.com/t/ign-5692-tagpaths-with-aao-not-found-in-embedded-veiw/56999): > > Hi! Just updated to 8.1.15 which solved an issue I had. So far, so good. Now I just found a new issue that is pretty easy to recreate. Tagpaths that contain non-standard letters shows up as “not found” in an Embedded View. Seems to only effect the Designer and everything works when running the project. I can see Nick is on Windows; @pascal.fragnoud, are you also on Windows? --- _[View the full topic](https://forum.inductiveautomation.com/t/ign-5692-designer-showing-c-as-a-c-in-perspective-label-in-embedded-view/66579)._