# Ignition 7.6.7 OPC UA **URL:** \ **Category:** Ignition\ **Created:** [January 26, 2024, 11:22am UTC](https://forum.inductiveautomation.com/t/ignition-7-6-7-opc-ua/84809 "2024-01-26T11:22:51Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![eduardo.ojalvo](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/eduardo.ojalvo/32/14356_2.png) [@eduardo.ojalvo](https://forum.inductiveautomation.com/u/eduardo.ojalvo)\ **Post date:** [January 26, 2024, 11:22am UTC](https://forum.inductiveautomation.com/t/ignition-7-6-7-opc-ua/84809/1 "2024-01-26T11:22:51Z")
Hi, I have an Igntion 7.6.7 with an opc ua module version 1.6.7 (b2014082615) I´m trying to read my tags from a opc client application (OPC Expert V9.4.2305.31) and i can connect but i don´t get the tags from scada. I don´t know how can the system expose the tags. I only see the diagnosis opc tags from the system and the devices tags created by adresses like you can see on the image attached. ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/7/b/7bd8d4d7547f096828c1afd7a996873165226d3b.png) May be the system doesn´t expose the tags and you must write the full item path or may be the system uses an id that i don´t know how can i relate it to the string tag path. Thank you very much. ---
**Author:** ![pascal.fragnoud](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pascal.fragnoud/32/24728_2.png) [@pascal.fragnoud](https://forum.inductiveautomation.com/u/pascal.fragnoud)\ **Post date:** [January 26, 2024, 1:07pm UTC](https://forum.inductiveautomation.com/t/ignition-7-6-7-opc-ua/84809/2 "2024-01-26T13:07:19Z")
7.6 ? damn, you should get in touch with the Guinness book, you probably hold the record ! Note that not only is it OLD, it's also not a LTS release, if IA already used the even/odd number system back then. Frankly with a version that old, only very few people will be able to help. I doubt even Phil remembers what exactly was going on in 7.6 ! Any chance you can update ? ---
**Author:** ![eduardo.ojalvo](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/eduardo.ojalvo/32/14356_2.png) [@eduardo.ojalvo](https://forum.inductiveautomation.com/u/eduardo.ojalvo)\ **Post date:** [January 27, 2024, 9:07am UTC](https://forum.inductiveautomation.com/t/ignition-7-6-7-opc-ua/84809/3 "2024-01-27T09:07:00Z")
Thank you [pascal.fragnofoud] but 7.6.7 version it´s the latest from 7.6 ---
**Author:** ![manel](https://avatars.discourse-cdn.com/v4/letter/m/ee7513/32.png) [@manel](https://forum.inductiveautomation.com/u/manel)\ **Post date:** [January 16, 2025, 4:24pm UTC](https://forum.inductiveautomation.com/t/ignition-7-6-7-opc-ua/84809/4 "2025-01-16T16:24:25Z")
Hi, I'm into the same situation. I'll appreciate any kind of help ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [January 16, 2025, 4:28pm UTC](https://forum.inductiveautomation.com/t/ignition-7-6-7-opc-ua/84809/5 "2025-01-16T16:28:03Z")
Please make a new post and include details like the version of Ignition you're using, what your problem is, what drivers you're using, what third party clients are involved, etc... ---
**Author:** ![Steve\_Laubach](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/steve_laubach/32/60900_2.png) [@Steve\_Laubach](https://forum.inductiveautomation.com/u/Steve_Laubach)\ **Post date:** [January 16, 2025, 6:41pm UTC](https://forum.inductiveautomation.com/t/ignition-7-6-7-opc-ua/84809/7 "2025-01-16T18:41:56Z")
I support a system that's 7.5.x I think it's 7.5.3 but I forget. I've tried to get them to upgrade but to no avail. but yes, 7.6 is pretty old. ---
**Author:** ![Steve\_Laubach](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/steve_laubach/32/60900_2.png) [@Steve\_Laubach](https://forum.inductiveautomation.com/u/Steve_Laubach)\ **Post date:** [January 16, 2025, 6:44pm UTC](https://forum.inductiveautomation.com/t/ignition-7-6-7-opc-ua/84809/8 "2025-01-16T18:44:28Z")
That may be true but it's from roughly 2013. I think my core cert was in 7.8 in 2015. It's very old and a version that is much harder to support.