# Ignition 7 Alarm Property Bindings

**URL:** <https://forum.inductiveautomation.com/t/ignition-7-alarm-property-bindings/90233>\
**Category:** Ignition\
**Tags:** ignition77, vision\
**Created:** [May 10, 2024, 2:16pm UTC](https://forum.inductiveautomation.com/t/ignition-7-alarm-property-bindings/90233 "2024-05-10T14:16:50Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![amarks](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/amarks/32/45610_2.png) [@amarks](https://forum.inductiveautomation.com/u/amarks)\
**Post date:** [May 10, 2024, 2:16pm UTC](https://forum.inductiveautomation.com/t/ignition-7-alarm-property-bindings/90233/1 "2024-05-10T14:16:50Z")

</div>

I'm adding some stuff to an existing 7.7 install. Creating a UDT, is there any way to parameterize the name or notes section of an alarm configuration? They don't have binding buttons.

---

<div class="post-metadata">

**Author:** ![Duffanator](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/duffanator/32/3560_2.png) [@Duffanator](https://forum.inductiveautomation.com/u/Duffanator)\
**Post date:** [May 10, 2024, 2:20pm UTC](https://forum.inductiveautomation.com/t/ignition-7-alarm-property-bindings/90233/2 "2024-05-10T14:20:15Z")

</div>

You can use UDT parameters, but you have to type them in manually between { } braces.

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/2/f/2f29b298d12025bdc788a19890f97c920be98652.png)

---

<div class="post-metadata">

**Author:** ![amarks](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/amarks/32/45610_2.png) [@amarks](https://forum.inductiveautomation.com/u/amarks)\
**Post date:** [May 10, 2024, 2:24pm UTC](https://forum.inductiveautomation.com/t/ignition-7-alarm-property-bindings/90233/3 "2024-05-10T14:24:16Z")

</div>

Good to know. That was my guess, but wasn't sure if that was actually going to work.

Also, I see that you're in a later version, but we'll see if it works for 7.7

---

<div class="post-metadata">

**Author:** ![Duffanator](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/duffanator/32/3560_2.png) [@Duffanator](https://forum.inductiveautomation.com/u/Duffanator)\
**Post date:** [May 10, 2024, 2:24pm UTC](https://forum.inductiveautomation.com/t/ignition-7-alarm-property-bindings/90233/4 "2024-05-10T14:24:47Z")

</div>

It does, I've been using that since this version of the alarm system came out.

---

<div class="post-metadata">

**Author:** ![amarks](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/amarks/32/45610_2.png) [@amarks](https://forum.inductiveautomation.com/u/amarks)\
**Post date:** [May 10, 2024, 4:45pm UTC](https://forum.inductiveautomation.com/t/ignition-7-alarm-property-bindings/90233/5 "2024-05-10T16:45:49Z")

</div>

Also, it seems like the "notes" property for alarms is not available for display in the alarm journal table for 7.7...

---

<div class="post-metadata">

**Author:** ![Duffanator](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/duffanator/32/3560_2.png) [@Duffanator](https://forum.inductiveautomation.com/u/Duffanator)\
**Post date:** [May 10, 2024, 4:54pm UTC](https://forum.inductiveautomation.com/t/ignition-7-alarm-property-bindings/90233/6 "2024-05-10T16:54:15Z")

</div>

Even under the alarm inspection? I don't remember if that was available in 7.7 or not.

![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/5/5/55e610ddcddf99c0e4dfcb0420a335cf985bf718.png)