# Ignition 8.0.12 Designer Black Screens following dbl-clk on image \[image component\]

**URL:** <https://forum.inductiveautomation.com/t/ignition-8-0-12-designer-black-screens-following-dbl-clk-on-image-image-component/35423>\
**Category:** Ignition\
**Tags:** ignition80\
**Created:** [June 8, 2020, 5:40pm UTC](https://forum.inductiveautomation.com/t/ignition-8-0-12-designer-black-screens-following-dbl-clk-on-image-image-component/35423 "2020-06-08T17:40:13Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![jonathan.saunders](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jonathan.saunders/32/44740_2.png) [@jonathan.saunders](https://forum.inductiveautomation.com/u/jonathan.saunders)\
**Post date:** [June 8, 2020, 5:40pm UTC](https://forum.inductiveautomation.com/t/ignition-8-0-12-designer-black-screens-following-dbl-clk-on-image-image-component/35423/1 "2020-06-08T17:40:13Z")

</div>

After upgrading from 7.9.13 to 8.0.12, when attempting to open the [image component] by double clicking on an existing image, screen freezes then turns black recovery takes around 5 minutes. I can open the image management via tools menu and while slow to respond, typically takes 1 minute or so, however double-clicking on an image locks the designer for several minutes. Creating unwanted delays in our development process. Any suggestions would be helpful.