# Ignition 8.1.2: Error Saving Node Configuration in wrapper.log

**URL:** <https://forum.inductiveautomation.com/t/ignition-8-1-2-error-saving-node-configuration-in-wrapper-log/44215>\
**Category:** Ignition\
**Tags:** ignition80\
**Created:** [March 8, 2021, 10:01am UTC](https://forum.inductiveautomation.com/t/ignition-8-1-2-error-saving-node-configuration-in-wrapper-log/44215 "2021-03-08T10:01:47Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![pgmo](https://avatars.discourse-cdn.com/v4/letter/p/d07c76/32.png) [@pgmo](https://forum.inductiveautomation.com/u/pgmo)\
**Post date:** [March 8, 2021, 10:01am UTC](https://forum.inductiveautomation.com/t/ignition-8-1-2-error-saving-node-configuration-in-wrapper-log/44215/1 "2021-03-08T10:01:47Z")

</div>

One month ago I upgraded an Ignition Gateway from 7.9.8 to **8.1.2 (b2021020311)**.  
Two days ago the wrapper.log started recording the following error every 2 seconds

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/5/a/5a8bc08748f4ba74f4a9984895ba999912d5b51a.png)  
Any suggestion?

Thanks in advance, regards

---

<div class="post-metadata">

**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\
**Post date:** [March 8, 2021, 5:59pm UTC](https://forum.inductiveautomation.com/t/ignition-8-1-2-error-saving-node-configuration-in-wrapper-log/44215/2 "2021-03-08T17:59:43Z")

</div>

This is indicating some internal error in the tag system. You should get in contact with support.

---

<div class="post-metadata">

**Author:** ![pgmo](https://avatars.discourse-cdn.com/v4/letter/p/d07c76/32.png) [@pgmo](https://forum.inductiveautomation.com/u/pgmo)\
**Post date:** [March 8, 2021, 7:46pm UTC](https://forum.inductiveautomation.com/t/ignition-8-1-2-error-saving-node-configuration-in-wrapper-log/44215/3 "2021-03-08T19:46:32Z")

</div>

> [@paul-griffith](#):
>
> You should get in contact with support

Thanks PGriffith for your suggestion. How can I get in contact with support? Shall I open a ticket?

---

<div class="post-metadata">

**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\
**Post date:** [March 8, 2021, 7:47pm UTC](https://forum.inductiveautomation.com/t/ignition-8-1-2-error-saving-node-configuration-in-wrapper-log/44215/4 "2021-03-08T19:47:06Z")

</div>

Yes, web or phone are our official support venues:  
[https://inductiveautomation.com/support/home/](https://inductiveautomation.com/support/home/)

---

<div class="post-metadata">

**Author:** ![sharmila.belvalkar](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/sharmila.belvalkar/32/30067_2.png) [@sharmila.belvalkar](https://forum.inductiveautomation.com/u/sharmila.belvalkar)\
**Post date:** [October 20, 2021, 8:58am UTC](https://forum.inductiveautomation.com/t/ignition-8-1-2-error-saving-node-configuration-in-wrapper-log/44215/5 "2021-10-20T08:58:59Z")

</div>

Did you get any solution on this from support? I am facing same issue on 8.1.1

---

<div class="post-metadata">

**Author:** ![pgmo](https://avatars.discourse-cdn.com/v4/letter/p/d07c76/32.png) [@pgmo](https://forum.inductiveautomation.com/u/pgmo)\
**Post date:** [October 20, 2021, 12:56pm UTC](https://forum.inductiveautomation.com/t/ignition-8-1-2-error-saving-node-configuration-in-wrapper-log/44215/6 "2021-10-20T12:56:15Z")

</div>

Hi Sharmila,  
even if I got a very good support from Inductiv Automation, we didn’t get a solution. After upgrading to 8.1.10 the error was gone.