# Ignition 8.1.30 & Sepasoft Production Model

**URL:** <https://forum.inductiveautomation.com/t/ignition-8-1-30-sepasoft-production-model/78133>\
**Category:** Ignition\
**Created:** [August 21, 2023, 6:03am UTC](https://forum.inductiveautomation.com/t/ignition-8-1-30-sepasoft-production-model/78133 "2023-08-21T06:03:13Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Soundararajans\_S](https://avatars.discourse-cdn.com/v4/letter/s/9f8e36/32.png) [@Soundararajans\_S](https://forum.inductiveautomation.com/u/Soundararajans_S)\
**Post date:** [August 21, 2023, 6:03am UTC](https://forum.inductiveautomation.com/t/ignition-8-1-30-sepasoft-production-model/78133/1 "2023-08-21T06:03:13Z")

</div>

Hi,

Am installed Ignition Version: 8.1.30 (b2023071408) & Production 3.81.9 (b2023062424), OEE Downtime 3.81.9 (b2023062424). In designer Production module is not showing. How to retrieve the module.

 ![1](https://us1.discourse-cdn.com/inductiveautomation/original/3X/4/b/4bd8a2bec151ed8100b2883fb933e2d9da56547d.png)  
 ![2](https://us1.discourse-cdn.com/inductiveautomation/original/3X/5/5/550ced87d9e48fd120bf3184d4d2f0ea9f6f4f5b.png)

---

<div class="post-metadata">

**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\
**Post date:** [August 21, 2023, 6:18am UTC](https://forum.inductiveautomation.com/t/ignition-8-1-30-sepasoft-production-model/78133/2 "2023-08-21T06:18:31Z")

</div>

Check if it's listed in **View** | **Panels** and enable it, if required. (I can't think of any other reason you can't see it.)

---

<div class="post-metadata">

**Author:** ![Soundararajans\_S](https://avatars.discourse-cdn.com/v4/letter/s/9f8e36/32.png) [@Soundararajans\_S](https://forum.inductiveautomation.com/u/Soundararajans_S)\
**Post date:** [August 21, 2023, 9:19am UTC](https://forum.inductiveautomation.com/t/ignition-8-1-30-sepasoft-production-model/78133/3 "2023-08-21T09:19:06Z")

</div>

![1](https://us1.discourse-cdn.com/inductiveautomation/original/3X/e/b/eb95e263a36b9edc395c421ddaa2152292c6571f.png)

In view these are the available contents. Which one I need to enable.

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [August 21, 2023, 1:19pm UTC](https://forum.inductiveautomation.com/t/ignition-8-1-30-sepasoft-production-model/78133/4 "2023-08-21T13:19:19Z")

</div>

Look for errors in the designer's local log viewer, in case the Sepasoft module failed to load in the designer.