# Ignition 8 and GE RX3i PAC Systems

**URL:** <https://forum.inductiveautomation.com/t/ignition-8-and-ge-rx3i-pac-systems/35513>\
**Category:** Ignition\
**Created:** [June 10, 2020, 4:52pm UTC](https://forum.inductiveautomation.com/t/ignition-8-and-ge-rx3i-pac-systems/35513 "2020-06-10T16:52:00Z")\
**Posts on this page:** 1\
**Showing post:** 13

<div class="post-metadata">

**Author:** ![Tim](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/tim/32/3361_2.png) [@Tim](https://forum.inductiveautomation.com/u/Tim)\
**Post date:** [December 7, 2020, 6:22pm UTC](https://forum.inductiveautomation.com/t/ignition-8-and-ge-rx3i-pac-systems/35513/13 "2020-12-07T18:22:05Z")

</div>

I think you can use the Kepware GE Ethernet driver for that.

> **[Kepware Industrial Connectivity Solutions | PTC](https://www.ptc.com/en/products/kepware)**
>
> Learn why Kepware is the name OT leaders trust for expansive, factory-wide industrial connectivity across all plants, operations, and machines.

There is a useful how-to PDF in this post (different controller but similar process):

> [@Connecting to Fanuc Robot R30iA controller](http://forum.inductiveautomation.com/t/connecting-to-fanuc-robot-r30ia-controller/7393):
>
> Im working with a robot integrator that doesn’t use a PLC in their system, they setup their robot cells so the robot controller handles all the logic and IO… Therefore the HMI needs to communicate directly with the controller. In an effort to see if I can talk them into using ignition on my project I figured out how to set up the communications on my own and made a “how to” manual for them. Thought I would post it here too… if anyone out there needs to go straight to a Fanuc robot maybe the …

---

_[View the full topic](https://forum.inductiveautomation.com/t/ignition-8-and-ge-rx3i-pac-systems/35513)._