# Ignition 8 Client on Raspberry Pi

**URL:** <https://forum.inductiveautomation.com/t/ignition-8-client-on-raspberry-pi/24464>\
**Category:** Ignition\
**Created:** [April 29, 2019, 3:26pm UTC](https://forum.inductiveautomation.com/t/ignition-8-client-on-raspberry-pi/24464 "2019-04-29T15:26:59Z")\
**Posts on this page:** 1\
**Showing post:** 19

<div class="post-metadata">

**Author:** ![cbiela](https://avatars.discourse-cdn.com/v4/letter/c/a87d85/32.png) [@cbiela](https://forum.inductiveautomation.com/u/cbiela)\
**Post date:** [April 30, 2019, 12:07pm UTC](https://forum.inductiveautomation.com/t/ignition-8-client-on-raspberry-pi/24464/19 "2019-04-30T12:07:11Z")

</div>

So it appears that arm is not compatible with Ignition v8. Is this known/intentional? How long will 7.9 be supported?

---

_[View the full topic](https://forum.inductiveautomation.com/t/ignition-8-client-on-raspberry-pi/24464)._