# Ignition Alarm Issue

**URL:** <https://forum.inductiveautomation.com/t/ignition-alarm-issue/27108>\
**Category:** Ignition\
**Tags:** ignition80\
**Created:** [August 2, 2019, 9:10am UTC](https://forum.inductiveautomation.com/t/ignition-alarm-issue/27108 "2019-08-02T09:10:23Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![kairongsen](https://avatars.discourse-cdn.com/v4/letter/k/eb9ed0/32.png) [@kairongsen](https://forum.inductiveautomation.com/u/kairongsen)\
**Post date:** [August 2, 2019, 9:10am UTC](https://forum.inductiveautomation.com/t/ignition-alarm-issue/27108/1 "2019-08-02T09:10:23Z")

</div>

Hi all, i have an issue regarding to alarm.

We plan to make a system which an alarm is being triggered when tag value = 1,the user is able to temporary **DISABLE** with using a button (Maintenance button).

When the alarm is normalized, the user will then press the Maintenance button to **ENABLE** the tag’s alarm. However when the tag’s alarm is enabled, tag value is 0, the tag’s alarm is still in active and unacknowledged status.

We create a memory tag that bind on the Maintenance button value.  
The tag’s alarm enable property is bind to the maintenance button’s memory tag.

For a better understanding, I will write the process flow as below:  
-alarm being trigger,shown in alarm page  
-press the button,alarm is disable,no show up in alarm page  
-problem solved, press the button again to enable the alarm  
-tag value now is 0.  
-but the alarm still appear in alarm page

I suspect the alarm is not cleared is due to Ignition memory functionality problem. How do I resolve this issue so that the alarm is cleared?

Now, the alarm is still persist, even though the tag value is normalized. I try to have a look and discover that, this is due to Ignition memory functionality. Could anyone please help to solve this issue?