# Ignition and Maple System

**URL:** <https://forum.inductiveautomation.com/t/ignition-and-maple-system/37883>\
**Category:** Ignition\
**Created:** [August 18, 2020, 8:49pm UTC](https://forum.inductiveautomation.com/t/ignition-and-maple-system/37883 "2020-08-18T20:49:48Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![mjohnson](https://avatars.discourse-cdn.com/v4/letter/m/a9a28c/32.png) [@mjohnson](https://forum.inductiveautomation.com/u/mjohnson)\
**Post date:** [August 18, 2020, 8:49pm UTC](https://forum.inductiveautomation.com/t/ignition-and-maple-system/37883/1 "2020-08-18T20:49:48Z")

</div>

I am using Ignition Edge as a MQTT publisher, Ignition Gateway as the MQTT broker, and I want to use a Maple system as a MQTT Client. Using MQTTfx as a tester I can see the info at the Broker. Having issues connecting with the Maple system even with it configured using the Sparkplug B encoding/decoding. Just wondering if anyone here had any experience with this kind of setup?

---

<div class="post-metadata">

**Author:** ![dparks](https://avatars.discourse-cdn.com/v4/letter/d/9de0a6/32.png) [@dparks](https://forum.inductiveautomation.com/u/dparks)\
**Post date:** [March 12, 2021, 3:40pm UTC](https://forum.inductiveautomation.com/t/ignition-and-maple-system/37883/2 "2021-03-12T15:40:20Z")

</div>

Any change you ever get an answers to your question?