# Ignition cannot auto scale on different monitor

**URL:** <https://forum.inductiveautomation.com/t/ignition-cannot-auto-scale-on-different-monitor/15968>\
**Category:** Ignition\
**Tags:** ignition79\
**Created:** [November 12, 2017, 2:38pm UTC](https://forum.inductiveautomation.com/t/ignition-cannot-auto-scale-on-different-monitor/15968 "2017-11-12T14:38:10Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jason.ma](https://avatars.discourse-cdn.com/v4/letter/j/5f9b8f/32.png) [@jason.ma](https://forum.inductiveautomation.com/u/jason.ma)\
**Post date:** [November 12, 2017, 2:38pm UTC](https://forum.inductiveautomation.com/t/ignition-cannot-auto-scale-on-different-monitor/15968/1 "2017-11-12T14:38:10Z")

</div>

Ignition ver: 7.9.4  
Is there anything necessary setting for autocale on different monitor?

---

<div class="post-metadata">

**Author:** ![mrogers](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/mrogers/32/4110_2.png) [@mrogers](https://forum.inductiveautomation.com/u/mrogers)\
**Post date:** [November 14, 2017, 4:48pm UTC](https://forum.inductiveautomation.com/t/ignition-cannot-auto-scale-on-different-monitor/15968/2 "2017-11-14T16:48:44Z")

</div>

There are a lot of things that could be causing problems - what exactly isn’t working?

I know one thing that screwed me up for a while was that templates have an option to “Enable Layout”. Without this I think the templates more or less ignore any layout you have set. So if your templates aren’t scaling properly, this could be why.

Other than that, I think people here are going to need more information to figure out what is wrong here.