# Ignition Communications with Mitsubishi PLC **URL:** \ **Category:** Ignition\ **Tags:** ignition80\ **Created:** [October 8, 2021, 1:33pm UTC](https://forum.inductiveautomation.com/t/ignition-communications-with-mitsubishi-plc/51752 "2021-10-08T13:33:02Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![franklepkowski](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/franklepkowski/32/4808_2.png) [@franklepkowski](https://forum.inductiveautomation.com/u/franklepkowski)\ **Post date:** [October 8, 2021, 1:33pm UTC](https://forum.inductiveautomation.com/t/ignition-communications-with-mitsubishi-plc/51752/1 "2021-10-08T13:33:02Z")
Hello All, Wondering what others have used with success to communicate to Mitsubishi PLCs. Here is some equipment below I will need to communicate with. R08CPU RD81OPC96 Regards, Frank ---
**Author:** ![Matrix\_Engineering](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/matrix_engineering/32/19781_2.png) [@Matrix\_Engineering](https://forum.inductiveautomation.com/u/Matrix_Engineering)\ **Post date:** [October 8, 2021, 2:08pm UTC](https://forum.inductiveautomation.com/t/ignition-communications-with-mitsubishi-plc/51752/2 "2021-10-08T14:08:31Z")
There is no built-in driver from IA for Mitsi. You will need to use KepServer etc as your OPC-UA server, and have Ignition connect to that. ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [October 8, 2021, 2:36pm UTC](https://forum.inductiveautomation.com/t/ignition-communications-with-mitsubishi-plc/51752/3 "2021-10-08T14:36:31Z")
IIRC from the ICC panel, a Mitsi driver is in the works.