# Ignition Edge 8.02 Ubuntu Install Syntax Error

**URL:** <https://forum.inductiveautomation.com/t/ignition-edge-8-02-ubuntu-install-syntax-error/31713>\
**Category:** Ignition\
**Tags:** ignition80\
**Created:** [January 29, 2020, 1:20pm UTC](https://forum.inductiveautomation.com/t/ignition-edge-8-02-ubuntu-install-syntax-error/31713 "2020-01-29T13:20:07Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![jtrimbleS](https://avatars.discourse-cdn.com/v4/letter/j/90ced4/32.png) [@jtrimbleS](https://forum.inductiveautomation.com/u/jtrimbleS)\
**Post date:** [January 29, 2020, 1:20pm UTC](https://forum.inductiveautomation.com/t/ignition-edge-8-02-ubuntu-install-syntax-error/31713/1 "2020-01-29T13:20:07Z")

</div>

Ok, so to start off, I am not very familiar with Ubuntu OS, so I may be making some mistakes here. I am trying to install Ignition Edge 8.02 on an Ubuntu (14.04) machine. I have gotten to the point where I have extracted the files from the zip file and when I try to run the .bat file I get: the following messages:

shambaugh@ubuntu:/usr/local/bin/ignition$ sudo ./install-ignition.bat ./install-ignition.bat: 1: ./install-ignition.bat: @echo: not found  
: not foundgnition.bat: 2: ./install-ignition.bat: setlocal  
: not foundgnition.bat: 3: ./install-ignition.bat:  
: not foundgnition.bat: 4: ./install-ignition.bat: rem  
./install-ignition.bat: 5: ./install-ignition.bat: Syntax error: “(” unexpected

Just as a note, I previously installed normal Ignition on this machine by mistake and had no issues. I uninstalled it and this is where I am at on Ignition Edge.

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [January 29, 2020, 1:22pm UTC](https://forum.inductiveautomation.com/t/ignition-edge-8-02-ubuntu-install-syntax-error/31713/2 "2020-01-29T13:22:57Z")

</div>

.bat files are for Windows. Use the .sh file in Linux.

This does not bode well for your deployment. A local class in linux administration might be advised. /:

---

<div class="post-metadata">

**Author:** ![jtrimbleS](https://avatars.discourse-cdn.com/v4/letter/j/90ced4/32.png) [@jtrimbleS](https://forum.inductiveautomation.com/u/jtrimbleS)\
**Post date:** [January 29, 2020, 1:26pm UTC](https://forum.inductiveautomation.com/t/ignition-edge-8-02-ubuntu-install-syntax-error/31713/3 "2020-01-29T13:26:31Z")

</div>

Thank you, I had thought I downloaded the linux zip file, but it looks like I chose the windows one instead.