# Ignition Edge Designer - multi-user

**URL:** <https://forum.inductiveautomation.com/t/ignition-edge-designer-multi-user/78323>\
**Category:** Ignition\
**Created:** [August 24, 2023, 8:14am UTC](https://forum.inductiveautomation.com/t/ignition-edge-designer-multi-user/78323 "2023-08-24T08:14:43Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![nvk27](https://avatars.discourse-cdn.com/v4/letter/n/ea5d25/32.png) [@nvk27](https://forum.inductiveautomation.com/u/nvk27)\
**Post date:** [August 24, 2023, 8:14am UTC](https://forum.inductiveautomation.com/t/ignition-edge-designer-multi-user/78323/1 "2023-08-24T08:14:43Z")

</div>

Hello,

Trying to understand Ignition Edge multi-user engineering capabilities..

Standard ignition supports multiple users using the Designer to work on the same project at the same time.

Is it the same for Ignition Edge as well? Can multiple users work on a single Ignition Edge Designer project at the same time?

---

<div class="post-metadata">

**Author:** ![Hayden\_Watson](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/hayden_watson/32/48792_2.png) [@Hayden\_Watson](https://forum.inductiveautomation.com/u/Hayden_Watson)\
**Post date:** [August 24, 2023, 8:16am UTC](https://forum.inductiveautomation.com/t/ignition-edge-designer-multi-user/78323/2 "2023-08-24T08:16:45Z")

</div>

Multiple people can work on Edge at the same time, just can't both open the clients