# Ignition Edge IIoT - Siemens IOT2040 or IOT2050

**URL:** <https://forum.inductiveautomation.com/t/ignition-edge-iiot-siemens-iot2040-or-iot2050/36849>\
**Category:** Ignition\
**Tags:** ignition80\
**Created:** [July 18, 2020, 8:11pm UTC](https://forum.inductiveautomation.com/t/ignition-edge-iiot-siemens-iot2040-or-iot2050/36849 "2020-07-18T20:11:12Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![MikeAMCO](https://avatars.discourse-cdn.com/v4/letter/m/df705f/32.png) [@MikeAMCO](https://forum.inductiveautomation.com/u/MikeAMCO)\
**Post date:** [July 18, 2020, 8:11pm UTC](https://forum.inductiveautomation.com/t/ignition-edge-iiot-siemens-iot2040-or-iot2050/36849/1 "2020-07-18T20:11:12Z")

</div>

Does anyone have any experience with installing Edge IIoT on the Siemens IOT2040 or IOT 2050?

I have customer that has standardized on Siemens hardware, but is willing to use MQTT (with Sparkplug B). I guess my biggest concern is the operating system. The IOT2040´s OS is supposedly Yocto Linux and the IOT2050 uses Debian.

Any experiences, comments, or “watchouts” are greatly appreciated.

---

<div class="post-metadata">

**Author:** ![Rv.Batista](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/rv.batista/32/3593_2.png) [@Rv.Batista](https://forum.inductiveautomation.com/u/Rv.Batista)\
**Post date:** [September 17, 2020, 9:26pm UTC](https://forum.inductiveautomation.com/t/ignition-edge-iiot-siemens-iot2040-or-iot2050/36849/2 "2020-09-17T21:26:08Z")

</div>

Hi MikeAMCO,

Do you was able to test something on Yocto? Same doubt over here.

Best Regards,