# Ignition Edge Linux failing to start **URL:** \ **Category:** Ignition\ **Created:** [March 13, 2020, 4:51pm UTC](https://forum.inductiveautomation.com/t/ignition-edge-linux-failing-to-start/33074 "2020-03-13T16:51:42Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![md.szyman](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/md.szyman/32/9240_2.png) [@md.szyman](https://forum.inductiveautomation.com/u/md.szyman)\ **Post date:** [March 13, 2020, 4:51pm UTC](https://forum.inductiveautomation.com/t/ignition-edge-linux-failing-to-start/33074/1 "2020-03-13T16:51:42Z")
I’m trying to run Ignition Edge on an industrial PC that runs a slightly modified Debian, but it fails to start. Below is the entirety of my wrapper.log after trying a few times. ```auto FATAL | wrapper | 2020/03/13 11:42:31 | Unable to get the path for '/home/USER/ignition_8.0.10/./ignition-gateway' - Success FATAL | wrapper | 2020/03/13 11:42:47 | Unable to get the path for '/home/USER/ignition_8.0.10/./ignition-gateway' - Success FATAL | wrapper | 2020/03/13 11:44:16 | Unable to get the path for './ignition-gateway' - Success ``` The first two are the result of running `sudo ./ignition.sh start` and the last one is from trying to run `sudo ./ignition-gateway` I’ve tried both 8.0.9 and 8.0.10 which both get the same error. ---
**Author:** ![James.Lorenz](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/james.lorenz/32/3290_2.png) [@James.Lorenz](https://forum.inductiveautomation.com/u/James.Lorenz)\ **Post date:** [March 13, 2020, 6:26pm UTC](https://forum.inductiveautomation.com/t/ignition-edge-linux-failing-to-start/33074/2 "2020-03-13T18:26:59Z")
There’s a few things to check for here: - `ignition-gateway` exists in the root of your main install directory - `ignition-gateway` is set to executable - `ignition-gateway` has proper permissions for the user that is running the gateway (i.e., `RUN_AS_USER` in `ignition.sh`) ---
**Author:** ![md.szyman](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/md.szyman/32/9240_2.png) [@md.szyman](https://forum.inductiveautomation.com/u/md.szyman)\ **Post date:** [March 13, 2020, 6:30pm UTC](https://forum.inductiveautomation.com/t/ignition-edge-linux-failing-to-start/33074/3 "2020-03-13T18:30:09Z")
1. It does 2. It is, I had tried running it directly when `ignition.sh` was failing. 3. `RUN_AS_USER` in `ignition.sh` is commented out and not specified.