# Ignition Edge on Beckhoff IPC **URL:** \ **Category:** Ignition\ **Created:** [May 31, 2022, 11:58am UTC](https://forum.inductiveautomation.com/t/ignition-edge-on-beckhoff-ipc/60200 "2022-05-31T11:58:34Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![ceckholm](https://avatars.discourse-cdn.com/v4/letter/c/b5ac83/32.png) [@ceckholm](https://forum.inductiveautomation.com/u/ceckholm)\ **Post date:** [May 31, 2022, 11:58am UTC](https://forum.inductiveautomation.com/t/ignition-edge-on-beckhoff-ipc/60200/1 "2022-05-31T11:58:34Z")
We have a customer asking to run Ignition Edge on a Beckhoff IPC. The Beckhoff IPC runs Windows10 so I think I should be able to install it on there? Could it be as simple as installing Ignition on the IPC and having the Beckhoff tags exposed to OPC? Thanks, Chuck ---
**Author:** ![Matrix\_Engineering](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/matrix_engineering/32/19781_2.png) [@Matrix\_Engineering](https://forum.inductiveautomation.com/u/Matrix_Engineering)\ **Post date:** [May 31, 2022, 12:34pm UTC](https://forum.inductiveautomation.com/t/ignition-edge-on-beckhoff-ipc/60200/2 "2022-05-31T12:34:34Z")
Yep 🙂 Think maybe @ASF uses beckhoff IPC’s already ---
**Author:** ![witman](https://avatars.discourse-cdn.com/v4/letter/w/d2c977/32.png) [@witman](https://forum.inductiveautomation.com/u/witman)\ **Post date:** [May 31, 2022, 7:01pm UTC](https://forum.inductiveautomation.com/t/ignition-edge-on-beckhoff-ipc/60200/3 "2022-05-31T19:01:42Z")
Yes, we’ve done this with full Ignition + Vision client. Configure TwinCAT OPC-UA and connect to it from Ignition. ---
**Author:** ![ASF](https://avatars.discourse-cdn.com/v4/letter/a/c4cdca/32.png) [@ASF](https://forum.inductiveautomation.com/u/ASF)\ **Post date:** [May 31, 2022, 10:50pm UTC](https://forum.inductiveautomation.com/t/ignition-edge-on-beckhoff-ipc/60200/4 "2022-05-31T22:50:05Z")
Sorry, not me - sounds like a neat solution though!