# Ignition edge - raspberry pi

**URL:** <https://forum.inductiveautomation.com/t/ignition-edge-raspberry-pi/35488>\
**Category:** Ignition\
**Created:** [June 10, 2020, 12:01pm UTC](https://forum.inductiveautomation.com/t/ignition-edge-raspberry-pi/35488 "2020-06-10T12:01:05Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![mcallister.krohne](https://avatars.discourse-cdn.com/v4/letter/m/e274bd/32.png) [@mcallister.krohne](https://forum.inductiveautomation.com/u/mcallister.krohne)\
**Post date:** [June 10, 2020, 12:01pm UTC](https://forum.inductiveautomation.com/t/ignition-edge-raspberry-pi/35488/1 "2020-06-10T12:01:05Z")

</div>

Hi guys,

So I recently installed ignition edge on a raspberry pi. After completing the installation I was able to run ignition and open it in the browser.

For some reason it just no longer runs. The browser does not open and I have the following error in the terminal

![edge1](https://us1.discourse-cdn.com/inductiveautomation/original/2X/3/337ab9b3dfbc7a121cb12d953afe29bb57cb68e6.jpeg)

---

<div class="post-metadata">

**Author:** ![nminchin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/nminchin/32/6911_2.png) [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\
**Post date:** [June 10, 2020, 12:34pm UTC](https://forum.inductiveautomation.com/t/ignition-edge-raspberry-pi/35488/2 "2020-06-10T12:34:44Z")

</div>

Ignition 8 technically dropped support for 32bit OS. However there’s an “unsupported” guide to starting it up in the knowledge base. I’ll try to find a link

[https://support.inductiveautomation.com/index.php?/Knowledgebase/Article/View/127/0/ignition-8-32-bit-vision-clients](https://support.inductiveautomation.com/index.php?/Knowledgebase/Article/View/127/0/ignition-8-32-bit-vision-clients)

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [June 10, 2020, 12:49pm UTC](https://forum.inductiveautomation.com/t/ignition-edge-raspberry-pi/35488/3 "2020-06-10T12:49:28Z")

</div>

Only for 32-bit x86. For ARM 32-bit is still supported and the most common.

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [June 10, 2020, 1:19pm UTC](https://forum.inductiveautomation.com/t/ignition-edge-raspberry-pi/35488/4 "2020-06-10T13:19:15Z")

</div>

@mcallister.krohne find the ignition wrapper.log file and upload it here so we can see if there’s information about why it won’t start. I think if you’re using the installer it’s in `/var/lib/ignition` or something? I’m not sure…

---

<div class="post-metadata">

**Author:** ![mcallister.krohne](https://avatars.discourse-cdn.com/v4/letter/m/e274bd/32.png) [@mcallister.krohne](https://forum.inductiveautomation.com/u/mcallister.krohne)\
**Post date:** [June 10, 2020, 1:32pm UTC](https://forum.inductiveautomation.com/t/ignition-edge-raspberry-pi/35488/5 "2020-06-10T13:32:43Z")

</div>

Hi Kevin,

I was able to resolve the problem. I had a mistake in the path that lets ignition start on reboot.