# Ignition Edge to Standard: Historical Tags Not Working **URL:** \ **Category:** Ignition\ **Tags:** database, edge\ **Created:** [March 29, 2025, 10:30pm UTC](https://forum.inductiveautomation.com/t/ignition-edge-to-standard-historical-tags-not-working/104416 "2025-03-29T22:30:58Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![DAVI\_SOARES](https://avatars.discourse-cdn.com/v4/letter/d/77aa72/32.png) [@DAVI\_SOARES](https://forum.inductiveautomation.com/u/DAVI_SOARES)\ **Post date:** [March 29, 2025, 10:30pm UTC](https://forum.inductiveautomation.com/t/ignition-edge-to-standard-historical-tags-not-working/104416/1 "2025-03-29T22:30:59Z")
I have two Ignition applications: one is the Standard version, and the other is the Edge version. In my Standard application, I have a configured database. I want the tags from my Edge application to be stored in the database of my Standard application, which has the Tag Historian module. I configured the Gateway Network by creating an outgoing connection from Ignition Edge to Ignition Standard and set up the DataSync in the Edge application. However, when I insert a Power Chart into the view, I don't have access to the tags configured with history. Datasync config: Remote Gateway Name: (gateway IP adress) Remote History Provider Name: History Tags Provider name from Standard application. Remote History Sync Enabled: Enabled Datasync Overview: Only one row: Name, Sync Type, Current Sync ID Edge Historian, Tag Historian, 0 Can anyone help? ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [March 29, 2025, 11:12pm UTC](https://forum.inductiveautomation.com/t/ignition-edge-to-standard-historical-tags-not-working/104416/2 "2025-03-29T23:12:18Z")
Use the gateway name, not the ip address, in the remote sync setup.