# Ignition Edge View

**URL:** <https://forum.inductiveautomation.com/t/ignition-edge-view/89755>\
**Category:** Ignition\
**Tags:** vision\
**Created:** [May 1, 2024, 8:05am UTC](https://forum.inductiveautomation.com/t/ignition-edge-view/89755 "2024-05-01T08:05:46Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\
**Post date:** [May 1, 2024, 9:13am UTC](https://forum.inductiveautomation.com/t/ignition-edge-view/89755/2 "2024-05-01T09:13:47Z")

</div>

If you want to see what the operator is seeing then you probably need VNC in read-only mode. There have been several discussions on the forum. For example, [VNC Connection from Perspective page](https://forum.inductiveautomation.com/t/vnc-connection-from-perspective-page/34969/).

---

_[View the full topic](https://forum.inductiveautomation.com/t/ignition-edge-view/89755)._