# Ignition Freezes

**URL:** <https://forum.inductiveautomation.com/t/ignition-freezes/42273>\
**Category:** Ignition\
**Created:** [January 14, 2021, 10:55pm UTC](https://forum.inductiveautomation.com/t/ignition-freezes/42273 "2021-01-14T22:55:35Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![kcollins](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kcollins/32/19646_2.png) [@kcollins](https://forum.inductiveautomation.com/u/kcollins)\
**Post date:** [January 15, 2021, 12:56am UTC](https://forum.inductiveautomation.com/t/ignition-freezes/42273/8 "2021-01-15T00:56:49Z")

</div>

It sounds similar to the issue covered here: [PLC using Logix Driver goes "Idle"](http://forum.inductiveautomation.com/t/plc-using-logix-driver-goes-idle/18505/47)

There are a few things you can try to mitigate the issue. One thing I found to help was to increase the number of concurrent requests for the device (in the settings for the device connection). Ultimately, upgrading to 8.0.17 includes a fix for the issue discussed in the thread.

---

_[View the full topic](https://forum.inductiveautomation.com/t/ignition-freezes/42273)._