# Ignition Gateway v8.0.13 not working after restarting of Advantech Screen Panel (PPC-4151W)

**URL:** <https://forum.inductiveautomation.com/t/ignition-gateway-v8-0-13-not-working-after-restarting-of-advantech-screen-panel-ppc-4151w/38965>\
**Category:** Ignition\
**Created:** [September 23, 2020, 3:00am UTC](https://forum.inductiveautomation.com/t/ignition-gateway-v8-0-13-not-working-after-restarting-of-advantech-screen-panel-ppc-4151w/38965 "2020-09-23T03:00:12Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![yin.cheng](https://avatars.discourse-cdn.com/v4/letter/y/85f322/32.png) [@yin.cheng](https://forum.inductiveautomation.com/u/yin.cheng)\
**Post date:** [September 23, 2020, 3:00am UTC](https://forum.inductiveautomation.com/t/ignition-gateway-v8-0-13-not-working-after-restarting-of-advantech-screen-panel-ppc-4151w/38965/1 "2020-09-23T03:00:12Z")

</div>

Hi All

I am using Advantech Screen Panel (PPC-4151w), to use it as a Ignition Edge Gateway/Ignition Gateway.  
When i first install the software, everything is fine, gateway running.  
When i do a restart of the panel, the gateway doesnt seem to be running anymore (localhost:8088 is unable to open). It would only work again if i re-install the gateway. After i restart the panel, again the gateway is not working anymore. i have tried with version 8.0.16, i thought was a version issue, hence i tried with 8.0.13, but the problem still persist.

I went to have a look at the Services after a restart. The Ignition Gateway and Ignition\_Gateway are both set to start automatically, but they are all stopped.

Another thing is that, there are 2 gateways (As per attached picture)

 ![Gateway](https://us1.discourse-cdn.com/inductiveautomation/original/3X/2/3/23930a55dafb93767ba1ca24f589b632825c163e.png)  
Is ‘Ignition\_Gateway’ causing some issue?  
Because on my own laptop, i only have one “Ignition Gateway”

Could someone kindly advise me how could i go troubleshoot about it?

Thank you very much.