# Ignition gateway web page donot access **URL:** \ **Category:** Ignition\ **Tags:** ignition79\ **Created:** [February 14, 2019, 4:03pm UTC](https://forum.inductiveautomation.com/t/ignition-gateway-web-page-donot-access/22572 "2019-02-14T16:03:57Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![GeraGarcia](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/geragarcia/32/18471_2.png) [@GeraGarcia](https://forum.inductiveautomation.com/u/GeraGarcia)\ **Post date:** [February 14, 2019, 4:03pm UTC](https://forum.inductiveautomation.com/t/ignition-gateway-web-page-donot-access/22572/1 "2019-02-14T16:03:57Z")
I have ignition installed in a workstation (ip: 132.132.43.190), I can access successfully to the ignition gateway web page locally through the link [http://localhost](http://localhost): 8088/main/web/home?0 (figure.- 1) When going to another pc to launch my project in the browser I put the address of the workstation where I have installed the ignition [http://132.132.43.190:8088/main/web/home?0](http://132.132.43.190:8088/main/web/home?0) and does not send me to the ignition gateway. (Figure.- 2), error message: (Timeout has run out The server at 132.132.43.190 is taking a long time to respond. The site could be temporarily out of service or very busy. Try again in a moment. If you can not load any page, check your computer’s network connection. If the network or your computer is protected by a firewall or proxy, make sure that Firefox can access the internet.) Return to the computer where I have installed the ignition (ip: 132.132.43.190) and in the browser I put the address [http://132.132.43.190:8088/main/web/home?0](http://132.132.43.190:8088/main/web/home?0) simulating as i trying to access from another PC of the network and work the ignition gateway web page. (figure.- 3) ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [February 14, 2019, 4:06pm UTC](https://forum.inductiveautomation.com/t/ignition-gateway-web-page-donot-access/22572/2 "2019-02-14T16:06:18Z")
Assuming the other computer is on the same network and can reach the one you installed Ignition on, you probably have a firewall blocking access. ---
**Author:** ![GeraGarcia](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/geragarcia/32/18471_2.png) [@GeraGarcia](https://forum.inductiveautomation.com/u/GeraGarcia)\ **Post date:** [February 14, 2019, 4:07pm UTC](https://forum.inductiveautomation.com/t/ignition-gateway-web-page-donot-access/22572/3 "2019-02-14T16:07:21Z")
yes, both pc are part of the same network, i have a remote connection raight now since the pc to the workstation ---
**Author:** ![GeraGarcia](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/geragarcia/32/18471_2.png) [@GeraGarcia](https://forum.inductiveautomation.com/u/GeraGarcia)\ **Post date:** [February 14, 2019, 4:14pm UTC](https://forum.inductiveautomation.com/t/ignition-gateway-web-page-donot-access/22572/4 "2019-02-14T16:14:10Z")
Kevin you are right was the firewall, thanks