# Ignition, Ignition edge with NVIDIA Jetson Xavier card

**URL:** <https://forum.inductiveautomation.com/t/ignition-ignition-edge-with-nvidia-jetson-xavier-card/41345>\
**Category:** Ignition\
**Tags:** ignition80\
**Created:** [December 9, 2020, 5:08pm UTC](https://forum.inductiveautomation.com/t/ignition-ignition-edge-with-nvidia-jetson-xavier-card/41345 "2020-12-09T17:08:11Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [December 9, 2020, 5:14pm UTC](https://forum.inductiveautomation.com/t/ignition-ignition-edge-with-nvidia-jetson-xavier-card/41345/2 "2020-12-09T17:14:04Z")

</div>

It seems user @joev has played with Maker Edition on these... maybe he can offer some feedback on how it runs or if there were any issues.

> [@Nvidia Xavier NX + Ignition Maker + Deepstream5 + MetaData + Python](http://forum.inductiveautomation.com/t/nvidia-xavier-nx-ignition-maker-deepstream5-metadata-python/38865):
>
> Here is a video Using the Nvidia Xavier NX to send Deepstream5 MetaData to Ignition maker using MQTT sparkplug, while streaming a webcam running Deepstream5 over RTSP all in Python. There is Git Hub link in video description with instructions to try it yourself. [[Nvidia Xavier NX + Ignition Maker + Deepstream5 + MetaData + Python] ](https://www.youtube.com/watch?v=sm4k9qylZTs) Good Luck

> [@XavierNX + I.P. Camera + Python Deepstream YOLO + RTSP stream out + Deepstream Metadata MQTT out](http://forum.inductiveautomation.com/t/xaviernx-i-p-camera-python-deepstream-yolo-rtsp-stream-out-deepstream-metadata-mqtt-out/41052):
>
> Here is a video of the Nvidia Xavier NX using a I.P. camera to run the video stream through a Python Deepstream YOLO app and then sending a RTSP video stream out. The app is also collecting metadata from the classes and sending that out MQTT using sparkplug to the Ignition Maker Application [[Nvidia XavierNX + I.P. Camera + Python Deepstream Yolo + RTSP Stream & Deepsteam Metadata MQTT out] ](https://www.youtube.com/watch?v=RlkRd5wGZNE)

> [@Video tutorial to install Maker edition on jetson Nano](http://forum.inductiveautomation.com/t/video-tutorial-to-install-maker-edition-on-jetson-nano/36608):
>
> If anybodys interested here is a video tutorial on installing maker edition on jetson nano [[Nvidia jetson nano Free HMI Scada Ignition software install & setup] ](https://www.youtube.com/watch?v=0kvurkDSYt4)

---

_[View the full topic](https://forum.inductiveautomation.com/t/ignition-ignition-edge-with-nvidia-jetson-xavier-card/41345)._